The Ford Barn

rodomotive · 07-02-2010, 01:40 PM

Need a pair of 16" x 5" steel wheels with 5 on 5 1/2" bolt pattern and internal nubs or clips for inside mount hub caps. I believe these wheels were from 1941 Mercury and Lincoln.
Thanks, Jeff

hotrod · 07-03-2010, 02:53 PM

I have a set of 15" x 5-1/2" wheels with the 5-1/2" bolt patteren and nubs on the inside for hubcaps. These are original ford wheels that i had on my 1946 ford coupe. used the original 1946 hubcaps on them. I'd want $200 for the set of 4 wheels plus shipping. They are in very nice shape. I ran radial tires on them tubless.
Larry

hotrod · 07-03-2010, 02:53 PM

my e-mail is [email protected]

26 lakes · 07-03-2010, 05:52 PM

Jeff, I have one wheel. Here are some pictures of it. I want $50.00 plus shipping for it. Thanks, David Atkins

rodomotive · 07-08-2010, 11:47 AM

Bttt

rodomotive · 07-13-2010, 05:41 PM

Sponsored Links (Register now to hide all advertisements)

Bttt

rumblegutz · 07-16-2010, 03:26 PM

I have a Lincoln 16x5 with 5.5 bolt pattern and the wheel is even in Canada. Although at the over side of the country. The wheel has the clips for a hub cap and they are in good shape. I believe the wheel should clean up pretty good. Beads are not heavily pitted from rust.

rodomotive · 07-25-2010, 11:10 AM

Bttt

rodomotive · 07-30-2010, 01:15 PM

Bttt

timcharles · 07-30-2010, 05:38 PM

Would the ford f-1 wheels work for you. They're 16 x 5 or 5 1/2 with nubs on the
inside. I can't tell the actual width because they have worn out tires on them.

07-02-2010, 01:40 PM	#1
rodomotive Member Join Date: May 2010 Location: Surrey, B.C.,Canada Posts: 76	WANTED:16"x5" MERC/LINCOLN wheels City: Vancouver State: WA or B.C. Need a pair of 16" x 5" steel wheels with 5 on 5 1/2" bolt pattern and internal nubs or clips for inside mount hub caps. I believe these wheels were from 1941 Mercury and Lincoln. Thanks, Jeff

07-03-2010, 02:53 PM	#2
hotrod Member Join Date: May 2010 Posts: 36	Re: WANTED:16"x5" MERC/LINCOLN wheels I have a set of 15" x 5-1/2" wheels with the 5-1/2" bolt patteren and nubs on the inside for hubcaps. These are original ford wheels that i had on my 1946 ford coupe. used the original 1946 hubcaps on them. I'd want $200 for the set of 4 wheels plus shipping. They are in very nice shape. I ran radial tires on them tubless. Larry

07-03-2010, 02:53 PM	#3
hotrod Member Join Date: May 2010 Posts: 36	Re: WANTED:16"x5" MERC/LINCOLN wheels my e-mail is [email protected]

07-08-2010, 11:47 AM	#5
rodomotive Member Join Date: May 2010 Location: Surrey, B.C.,Canada Posts: 76	Re: WANTED:16"x5" MERC/LINCOLN wheels Bttt

07-13-2010, 05:41 PM	#6
rodomotive Member Join Date: May 2010 Location: Surrey, B.C.,Canada Posts: 76	Re: WANTED:16"x5" MERC/LINCOLN wheels Sponsored Links (Register now to hide all advertisements) Bttt

07-25-2010, 11:10 AM	#8
rodomotive Member Join Date: May 2010 Location: Surrey, B.C.,Canada Posts: 76	Re: WANTED:16"x5" MERC/LINCOLN wheels Bttt

07-30-2010, 01:15 PM	#9
rodomotive Member Join Date: May 2010 Location: Surrey, B.C.,Canada Posts: 76	Re: WANTED:16"x5" MERC/LINCOLN wheels Bttt

07-30-2010, 05:38 PM	#10
timcharles Junior Member Join Date: May 2010 Location: no. ca Posts: 28	Re: WANTED:16"x5" MERC/LINCOLN wheels Would the ford f-1 wheels work for you. They're 16 x 5 or 5 1/2 with nubs on the inside. I can't tell the actual width because they have worn out tires on them.