|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-03-2021, 09:57 PM | #1 |
Senior Member
Join Date: Sep 2017
Location: Minnesota
Posts: 113
|
How do I wire up a B distributor
I have a B distributor and would appreciate some help in wiring it up. There is all kinds of information on timing but can’t find a picture of where the ignition switch wire goes. Thanks
|
02-03-2021, 10:50 PM | #2 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: How do I wire up a B distributor
There's an arm sticking out that you can adjust,on the end of that arm is a screw,it goes under it.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-03-2021, 10:57 PM | #3 |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,884
|
Re: How do I wire up a B distributor
A "B" distributor will not work with an original Pop Out Switch. You will need a simple "off-on" switch.
Run a wire from the terminal on the outside of the "B" distributor to one terminal of the Ignition Switch. The wire that originally attached to the Pop-Out switch goes to the other terminal on the "Off-On" ignition switch. All the other wiring is the same as stock Model A. Chris W. |
02-04-2021, 11:05 AM | #4 |
Senior Member
Join Date: Sep 2017
Location: Minnesota
Posts: 113
|
Re: How do I wire up a B distributor
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|