The Ford Barn

Jake · 08-02-2012, 02:43 PM

WANTED ;Door window channels for a 1931 victoria . not argentin
phone Bill @ 503 - 657-1890 I am posting for a friend. this is his phone number.

jw hash · 08-03-2012, 07:58 AM

are you talking the steel window channel in the lower part of the door or the felt channel

Jake · 08-04-2012, 01:22 AM

I am talking about the steel window channels. I should have called them the glass channels.

jw hash · 08-04-2012, 08:49 AM

the front and rear window channels are the same as the SW front doors. if you are looking for the lower window channel they have rights and lefts NO ONE makes a repo that is worth 2 cents, I buy the 32 tudor repo`s cut the slide off and through them away, shorten the channel and use the channel, than I weld original slides on them, I do have some good originals and some for patterns, if you need some pictures or measurements let me know. John [email protected]

Jake · 08-10-2012, 01:55 AM

Sponsored Links (Register now to hide all advertisements)

J.W. Thanks for helping Bill out with the parts he needed. Jake T.

08-02-2012, 02:43 PM	#1
Jake Member Join Date: May 2010 Location: Oregon Posts: 34	31 Vickie window channels City: gladstone State: oregon WANTED ;Door window channels for a 1931 victoria . not argentin phone Bill @ 503 - 657-1890 I am posting for a friend. this is his phone number.

08-03-2012, 07:58 AM	#2
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: 31 Vickie window channels are you talking the steel window channel in the lower part of the door or the felt channel

08-04-2012, 01:22 AM	#3
Jake Member Join Date: May 2010 Location: Oregon Posts: 34	Re: 31 Vickie window channels I am talking about the steel window channels. I should have called them the glass channels.

08-04-2012, 08:49 AM	#4
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: 31 Vickie window channels the front and rear window channels are the same as the SW front doors. if you are looking for the lower window channel they have rights and lefts NO ONE makes a repo that is worth 2 cents, I buy the 32 tudor repo`s cut the slide off and through them away, shorten the channel and use the channel, than I weld original slides on them, I do have some good originals and some for patterns, if you need some pictures or measurements let me know. John [email protected]

08-10-2012, 01:55 AM	#5
Jake Member Join Date: May 2010 Location: Oregon Posts: 34	Re: 31 Vickie window channels Sponsored Links (Register now to hide all advertisements) J.W. Thanks for helping Bill out with the parts he needed. Jake T.