Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-09-2021, 12:48 PM   #1
CA Victoria
Senior Member
 
CA Victoria's Avatar
 
Join Date: Feb 2011
Posts: 2,107
Default Crankshaft Flange Data

Looking for the flywheel mounting bolt and locator pin hole measurements in the flywheel. Measured mine, but would like to confirm with data from Ford drawings or from cad.
Thank you in advance....
__________________
Tim
Downtown, Ca
CA Victoria is offline   Reply With Quote
Old 01-09-2021, 12:58 PM   #2
Terry Burtz, Calif
Senior Member
 
Join Date: May 2010
Location: Campbell,CA, USA
Posts: 313
Default Re: Crankshaft Flange Data

Flange Dia 3.998/3.999 inch
Bolt Circle Dia 3.249/3.251 inch
Dowel Pin Dia .436/.437 inch
Bolt holes 7/16-20 NF-3 thread
Terry Burtz, Calif is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-09-2021, 01:17 PM   #3
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,132
Default Re: Crankshaft Flange Data

Sponsored Links (Register now to hide all advertisements)
i have a crankshaft picture that has the bolt center diameter (and pins) as 3248-3.251 if that helps
Kurt in NJ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:46 PM.