|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-05-2011, 08:24 AM | #1 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,195
|
More props for Jim & Bubba's Ignition-flathead candy attached!
More props for Jim @ the crew at Bubba's:
Below is a picture of a dizzy project I've been wanting to do for a while. It's a Norm Frick 90 degree drive with an older Mallory SBC dizzy w/ tach drive. Should be a fairly unique and great working set-up for any flathead. Just heard from Jim and it's almost wrapped up. Thought I'd give Jim and his shop was additional exposure. Tim |
11-05-2011, 11:33 AM | #2 |
Senior Member
Join Date: Oct 2010
Location: North Pole, Alaska
Posts: 1,470
|
Re: More props for Jim & Bubba's Ignition-flathead candy attached!
A few years ago, I met a gentleman with the last name Frick, at a swap meet in Texas. He was into Flatheads, could this be the same guy? I have his card here somewhere.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-10-2011, 02:43 PM | #3 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: More props for Jim & Bubba's Ignition-flathead candy attached!
Ok got to put the finishing touches on the side drive today....
We machined a Mallory V8 model YC to the specs for the side drive. And made it a tach drive to boot. Ran on tester and added new solid wires to the two piece distributor cap . Note the bead , blast and age cycle as well , i will discuss in another post on the board how this happens.. |
11-10-2011, 05:58 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,969
|
Re: More props for Jim & Bubba's Ignition-flathead candy attached!
Sponsored Links (Register now to hide all advertisements)
Quote:
Thanks Cheers Tony |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|