|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-23-2022, 02:55 PM | #1 |
Senior Member
Join Date: May 2010
Location: Newport, NC
Posts: 195
|
Convertible Top Cylinder Yoke Screw
I am replacing the convertible top cylinders on my '46 Super Deluxe. I had to drill and use an extractor to get the screw which attaches the yoke to the top frame out and apart. I am searching for a slotted shoulder screw with 3/8" 24 threads and a 1/2" shoulder. Thread and shoulder lengths are each 3/4 inch.
I'm not sure if this is the original screw. I talked with the guys in Punta Gorda and they said that they used some type of pin which they are sending with the new cylinders. I'm checking out my options. There's not a lot of 3/8 24 screws out there. |
08-23-2022, 03:27 PM | #2 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,010
|
Re: Convertible Top Cylinder Yoke Screw
Check out McMaster-Carr website. Specifically, look at "shoulder bolts".
__________________
"I can explain it for you. However, I can't understand it for you". |
Sponsored Links (Register now to hide all advertisements) |
|
08-23-2022, 04:00 PM | #3 |
Senior Member
Join Date: May 2010
Location: Newport, NC
Posts: 195
|
Re: Convertible Top Cylinder Yoke Screw
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|