01-12-2017, 05:00 PM | #1 |
Senior Member
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
|
Choke rod
Not having one to look at, what is the mechanism which keeps the choke rod from pulling out thru the firewall?? When I use the choke it aiplwaysvpulls loose from the GAV?
|
01-12-2017, 05:20 PM | #2 |
Senior Member
Join Date: May 2010
Location: Raleigh, NC
Posts: 510
|
Re: Choke rod
check the catalogs...there is a sleeve and a spring to keep things where they need to be. Brattons has a good diagram of this and the pieces needed are inexpensive, so get it set up correctly and enjoy.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-12-2017, 07:32 PM | #3 |
Senior Member
Join Date: Nov 2016
Location: VA
Posts: 569
|
Re: Choke rod
The two rods connect together with notches. You then slide over sleeve and it stays put.
|
01-12-2017, 07:47 PM | #4 |
Senior Member
Join Date: Apr 2016
Location: St Clair, Michigan
Posts: 395
|
Re: Choke rod
I just went out and snapped a pic of my car.
|
01-12-2017, 08:53 PM | #5 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: Choke rod
too much play between the choke lever ( raised bump on the lever) and gav sleeve recess?
|
01-13-2017, 04:56 AM | #6 |
Senior Member
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
|
Re: Choke rod
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|