The Ford Barn

Chevmn56 · 05-24-2022, 03:22 PM

All vendors seem too be out of this part. I have all new tires tubes etc.... But. I am missing these.

Does anyone have 5 they can part with???

KenBolton · 05-25-2022, 09:26 AM

Who made them? I learned a couple of years ago when they were hard to come by there were at least two different manufacturers. Each had their own valve stem threads. I needed those previously made by A&L. The ones I initially ordered were not and would not work on my stems. I don’t remember who made them but, if you can use these, they are available.

1931 flamingo · 05-25-2022, 01:43 PM

When you find them be sitting down when you find out the price.................
Paul in CT

Chevmn56 · 05-25-2022, 03:31 PM

[QUOTE=KenBolton;2132696]Who made them? I learned a couple of years ago when they were hard to come by there were at least two different manufacturers. Each had their own valve stem threads. I needed those previously made by A&L. The ones I initially ordered were not and would not work on my stems. I don’t remember who made them but, if you can use these, they are available.[/QUOTE

If you have 5 that are the same and they are right for 31, I'll buy them from.you. I don't have my stems yet still waiting for delivery. Snyder has them, as well as Mike's, but all are "temporarily" out of stock.

Chevmn56 · 05-25-2022, 03:33 PM

Sponsored Links (Register now to hide all advertisements)

Guy at Mike's said there is only 1 guy that makes these covers and he is just now getting going again after Rona, he's a one man band so it could be a while before he gets caught up.

05-24-2022, 03:22 PM	#1
Chevmn56 Senior Member Join Date: Oct 2017 Location: Bluffdale, Utah Posts: 101	1931 valve stem. Dust covers All vendors seem too be out of this part. I have all new tires tubes etc.... But. I am missing these. Does anyone have 5 they can part with???

05-25-2022, 09:26 AM	#2
KenBolton Senior Member Join Date: Jun 2020 Location: Fall Creek, WI Posts: 213	Re: 1931 valve stem. Dust covers Who made them? I learned a couple of years ago when they were hard to come by there were at least two different manufacturers. Each had their own valve stem threads. I needed those previously made by A&L. The ones I initially ordered were not and would not work on my stems. I don’t remember who made them but, if you can use these, they are available.

05-25-2022, 01:43 PM	#3
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,390	Re: 1931 valve stem. Dust covers When you find them be sitting down when you find out the price................. Paul in CT

05-25-2022, 03:31 PM	#4
Chevmn56 Senior Member Join Date: Oct 2017 Location: Bluffdale, Utah Posts: 101	Re: 1931 valve stem. Dust covers [QUOTE=KenBolton;2132696]Who made them? I learned a couple of years ago when they were hard to come by there were at least two different manufacturers. Each had their own valve stem threads. I needed those previously made by A&L. The ones I initially ordered were not and would not work on my stems. I don’t remember who made them but, if you can use these, they are available.[/QUOTE If you have 5 that are the same and they are right for 31, I'll buy them from.you. I don't have my stems yet still waiting for delivery. Snyder has them, as well as Mike's, but all are "temporarily" out of stock.

05-25-2022, 03:33 PM	#5
Chevmn56 Senior Member Join Date: Oct 2017 Location: Bluffdale, Utah Posts: 101	Re: 1931 valve stem. Dust covers Sponsored Links (Register now to hide all advertisements) Guy at Mike's said there is only 1 guy that makes these covers and he is just now getting going again after Rona, he's a one man band so it could be a while before he gets caught up.