|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-16-2013, 10:48 AM | #1 |
Member
Join Date: Mar 2013
Posts: 53
|
How to remove lower distributor shaft
I need to remove the lower distributor shaft on my 2 piece style distributor (the shaft that runs from the upper shaft to the oil pump drive gear). Can anone tell me how to go about doing this? How do you remove the spring? And how do you take the shaft out? Help would be greatly appreciated. Thanks
|
06-16-2013, 10:53 AM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,100
|
Re: How to remove lower distributor shaft
There is no spring on the shaft itself I use a magnet if not stuck. The drive gear has the spring by removing the side valve cover to access.
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
06-16-2013, 11:18 AM | #3 |
Member
Join Date: Mar 2013
Posts: 53
|
Re: How to remove lower distributor shaft
Gary, thanks for the quick response. Yea I just figured this out. It was just stuck so I took the valve cover off and grabed it from the underside and worked it out.
|
06-16-2013, 07:38 PM | #4 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: How to remove lower distributor shaft
I lift mine out with needle nose pliers.
|
06-17-2013, 12:25 AM | #5 |
Senior Member
Join Date: Nov 2011
Location: B.C. Canada
Posts: 1,746
|
Re: How to remove lower distributor shaft
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|