|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-10-2021, 03:18 PM | #1 |
Senior Member
Join Date: May 2012
Location: Corbett OR
Posts: 233
|
59ab oil pressure sending unit
I believe my oil pressure sending unit is shot. Is there a way to test one. If it is not good, There are 50 and 80 units. Which is correct for a 59ab. Thanks Ron
|
05-10-2021, 03:30 PM | #2 |
Senior Member
Join Date: May 2010
Location: Saratoga Springs, NY
Posts: 1,110
|
Re: 59ab oil pressure sending unit
80 lb, test it by using a mechanical gauge.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-10-2021, 08:36 PM | #3 |
Senior Member
Join Date: Oct 2018
Location: Glendive MT
Posts: 155
|
Re: 59ab oil pressure sending unit
If your gauge reads to 80psi, use the 80psi sender.
If it only reads to 50psi, use the 50psi sender. |
05-11-2021, 07:17 PM | #4 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: 59ab oil pressure sending unit
|
05-11-2021, 07:35 PM | #5 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: 59ab oil pressure sending unit
Sponsored Links (Register now to hide all advertisements)
__________________
Alan |
|
|
Sponsored Links (Register now to hide all advertisements) |
|