|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
10-02-2020, 03:18 PM
|
#1 |
|
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,153
|
wrong / worn axle shims
Guten Abend!
About 3500 ml / <2 years ago I revised all the brakes. Since the rear brake drums were too loose on the axle cone, I used the thin spicer / cone / axle shim. Today I installed new brake shoes because the old ones were still thick, but led to extreme fading because overharding, I think. I noticed that the mounted spicers were crushed and crumbly. Did I do something wrong with the assembly back then?
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 11:48 AM.