Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-02-2012, 08:47 PM   #1
DosCoupe
Junior Member
 
DosCoupe's Avatar
 
Join Date: Feb 2012
Location: Bettendor, Iowa
Posts: 5
Default Alignment specifications 1932 Ford

I just got back from the Heartland Nationals in Des Moines and discovered some serious tread wear on my left front tire. The odd thing is the wear is on the inside tread and the center of the tread is really worn. The tire pressure was 24 psi so I don't think that they were overinflated. Although the air temp was about 95 degrees on the way back.
One more thing, I have about 8 ounces of those dynamic balance lead bb's in the tire to help with the balance.
If anyone has some clues as to what is happening, I would be interested in your experience.
I need to set the toe in at about 1/8 inch according some of the old time rodders from around here, other than that I don't know what to do.
Thanks in advance for your comments.

DosCoupe
DosCoupe is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:11 AM.