1932 transmission prefix 18-oooooo question

[FRANK PKNY]

I'm putting a 36LB V'8 engine in a 32 with it's what appears to be a 32 stock
V-8 transmission. The 32 clutch appears much different and the flywheel is indented . Will the 36 engine fit without any problems. This is the first 32 I ever worked on and am concerned the bell housing may not work between the 32 transmission and the 36 engine. Any input would be appreciated FrankPKNY

[DavidG]

The '32 transmission case and input shaft will mate just fine with a '36 LB or non-LB or any other flathead V8 engine of the period. Ignore the '32 clutch and flywheel and use those intended for the vintage of the engine.

[Early Ford Junkie]

Originally Posted by DavidG

The '32 transmission case and input shaft will mate just fine with a '36 LB or non-LB or any other flathead V8 engine of the period. Ignore the '32 clutch and flywheel and use those intended for the vintage of the engine.

Yup what he said will work

[alchemy]

Originally Posted by Early Ford Junkie

Yup what he said will work

I dunno. Does that DavidG guy really know anything about 32's?

[DavidG]

No, but sometimes I make good guesses.

[1931 flamingo]

Sponsored Links (Register now to hide all advertisements)

HA-HA
Paul in CT He wrote the book.

[FRANK PKNY]

Thanks for the information. I thought it would work with a nine inch clutch set up. I love these old Fords. FrankPKNY