Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-01-2021, 12:51 PM   #1
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,332
Default New mini-video: JB Weld ExtremeHeat

I've put up a new video showing my experience using JB Weld ExtremeHeat paste to fill in pitting and low spots, both around the exhaust ports and on the block surface. This was something Brent Terry suggested in this thread and I finally had time to try it out. Thanks Brent!

https://www.youtube.com/watch?v=ic9n_DzFXN0
alexiskai is offline   Reply With Quote
Old 03-01-2021, 01:18 PM   #2
Brentwood Bob
Senior Member
 
Join Date: May 2010
Location: brentwood, ca
Posts: 4,215
Default Re: New mini-video: JB Weld ExtremeHeat

Liked it.
Brentwood Bob is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-01-2021, 01:51 PM   #3
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
Default Re: New mini-video: JB Weld ExtremeHeat

Good job again. Nice content videos you are producing.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Old 03-01-2021, 05:26 PM   #4
john in illinois
Senior Member
 
john in illinois's Avatar
 
Join Date: May 2010
Location: Illinois
Posts: 2,181
Default Re: New mini-video: JB Weld ExtremeHeat

Thanks for taking the time to make the video.



John
__________________
Welcome each day
john in illinois is offline   Reply With Quote
Old 03-01-2021, 05:29 PM   #5
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: New mini-video: JB Weld ExtremeHeat

Thanks for your time and effort to assist other Barners. We need more members like you ! Not surprised Brent was involved. Wayne
McMimmcs is offline   Reply With Quote
Old 03-02-2021, 08:27 AM   #6
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,088
Default Re: New mini-video: JB Weld ExtremeHeat

Sponsored Links (Register now to hide all advertisements)
Thank you for posting your video.
old31 is online now   Reply With Quote
Old 03-03-2021, 12:17 PM   #7
duke36
Senior Member
 
Join Date: Jun 2015
Posts: 1,414
Default Re: New mini-video: JB Weld ExtremeHeat

Nice video. After reading the user reviews for the product, perhaps give consideration to PES 101 or Belzona 1111 though quite expensive. These are industrial grade epoxies used in the marine and other environments..
duke36 is offline   Reply With Quote
Old 03-03-2021, 12:37 PM   #8
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,332
Default Re: New mini-video: JB Weld ExtremeHeat

I think the ExtremeHeat is a good match for this use case – it doesn't have to have any strength of its own, hold anything together, etc. It's pure filler. It's Bondo for engine blocks.
alexiskai is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:35 AM.