The Ford Barn

jm29henry · 03-28-2016, 07:35 PM

Best ever you won't be disappointed !!!

Walter Ezzell · 03-28-2016, 07:44 PM

Absolutely the best that I have ever used. I would pay more if I had to. Restored a 39 Ford Pickup using it (especially floor board screws) never had one that I could not get out after treating with the kroil. You will not regret. Fantastic on old hit and miss engines that have set outside for years. I used the regular liquid and the aero for spraying into spots that are very hard to reach. I have tried some of their other products and they all work just as they advertise.

CarlG · 03-28-2016, 08:15 PM

Quote:

Originally Posted by glenn in camino

I use regular Kroil , and I love it. What's different about AeroKroil?

AeroKroil is the same stuff, just in an aerosol can.

old31 · 03-29-2016, 09:11 AM

I have been using this for years and it works and is cheap. Look at the specs.

gweilbaker · 03-29-2016, 09:29 AM

I have a 35 year old can of GM heat riser valve lube that works great and a little goes a long way hence the age of my supply. Today it is known as GM Fluid 88862628 Rust Penetrant and Inhibitor. Just another option.

Bob Wright · 03-29-2016, 02:49 PM

Sponsored Links (Register now to hide all advertisements)

Bought a gallon about 40 years ago,still have 1/2 left. Kroil really works the best (also have tried the special home made blends)and the most of the others as well.

ian Simpson · 03-29-2016, 04:44 PM

Quote:

Originally Posted by Oldbluoval

Buy the non-aerosol too
Use the aerosol for where you need reach or upward.
Liquid seems to go further
It's really good stuff
I don't think I even have WD-40 anymore in the shop although it has alternative uses
Aerokroil is aerosol
Kroil is non-aerosol

Don't forget WD40's original use was as a water dispersant. I avoid using it as a lubricant or rust buster as it leaves a trace of silicone-like matter when it evaporates. This will tear up bearings and bushings.

8aflyboy · 03-29-2016, 11:10 PM

aerokroil is so good it will leak out of it's own can.(LOL)

bikemaniac · 03-30-2016, 01:15 AM

Based on internet reviews alone I decided to buy 2 bottles of 8oz Kroil Oil. However I live 10000 km away in Denmark/Europe and you cannot buy that stuff in Europe. Thus, I imported the two small bottles and paid huge amounts for shipping and import tax.

This is truly the best stuff. Nobody knows it here. People just spray huge amounts of WD40 everywhere (or similar copies of WD40) and when I tell them about the wonders of Kroil Oil they just look at me like a nut case.

Here in Europe, at least northern Europe, WD40 has became such an established brand that people dont say "rust penetrating oil" anymore, but just "WD40" and everybody knows what they mean. People just spray WD40 or similar products everywhere and still snap bolts/nuts all the time. They have no clue.

But I don't like the smell of Kroil Oil at all. It smells very synthetic and chemical and tends to hang around for a long time.

I use a plastic pipette with my non aerosol Kroil oil and manage to control the amount used very precisely - also upwards to some degrees. I think if you are using a pipette to make precision applications a 8 oz bottle will serious last a lifetime.

Chris Haynes · 03-30-2016, 02:25 AM

I buy AeroKroil by the case. Buy any quantity you want from http://kanolabs.com/

midgetracer · 03-30-2016, 07:32 AM

It is great stuff. My gallon can is called Kano Kroil and the aerosal stuff is called AeroKroil. Same great product, only different packaging.

SeaSlugs · 03-30-2016, 07:59 AM

kroil is amazing stuff, we used it at work all the time. smell you get used to haha, one smell i am used to but still dont like is hot liquid wrench...

and yea it always seems to creep out of its own can especially if its in a warm place.

katy · 03-31-2016, 11:17 AM

Kroil has been around a long time.

Roadster Rich · 03-31-2016, 11:59 AM

I have used the Acetone and ATF mix for many years. Keep it in about a 20 oz. glass jar and shake it up and put into an old finger pump oil can when I need it. Can anyone tell me that they know the Kroil is even better than my mix? If so I will get a can.

Aok · 03-31-2016, 02:28 PM

Quote:

Originally Posted by old31

I have been using this for years and it works and is cheap. Look at the specs.

I agree with your chart in the pdf if I do not use kroil I use the liquid wrench spray as it works almost as good as the kroil.

http://www.amazon.com/Liquid-Wrench-...=sr_1_1&sr=8-1

wmws · 03-31-2016, 02:38 PM

I agree with those using 50/50 mix of ATF and Acetone. Works way better than any commercial product. You do have to shake it up each time you use it as it will separate. Cost is very low.

mshmodela · 03-31-2016, 02:51 PM

I've had good luck with PB Blaster... Now I'm a tad Cleveland biased

http://blastercorp.com/about_Blaster_Corporation

Mitch//pa · 03-31-2016, 03:11 PM

Quote:

Originally Posted by mshmodela

I've had good luck with PB Blaster... Now I'm a tad Cleveland biased

http://blastercorp.com/about_Blaster_Corporation

As I mentioned that's what we use in the shop... The guys would waste the Kroil, it would need to be put under lock and key as I would have to distribute the drops when needed

mkmskm · 03-31-2016, 03:35 PM

I think it was Skinned Knuckles magazine that did a test a few years back on identically rusted and seized items and they ranked as best to worst based on force needed to break loose:

50/50 ATF/acetone
Kroil
PB Blaster - and it was a distant 3rd
WD 40

I've always used Kroil with great success and the spray trea reaches places you can't with the ATF/acetone

03-28-2016, 07:35 PM	#21
jm29henry Senior Member Join Date: Sep 2010 Location: michigan Posts: 1,126	Re: AeroKroil rust penetrate Best ever you won't be disappointed !!!

03-28-2016, 07:44 PM	#22
Walter Ezzell Member Join Date: May 2010 Posts: 59	Re: AeroKroil rust penetrate Absolutely the best that I have ever used. I would pay more if I had to. Restored a 39 Ford Pickup using it (especially floor board screws) never had one that I could not get out after treating with the kroil. You will not regret. Fantastic on old hit and miss engines that have set outside for years. I used the regular liquid and the aero for spraying into spots that are very hard to reach. I have tried some of their other products and they all work just as they advertise.

03-29-2016, 09:29 AM	#25
gweilbaker Senior Member Join Date: May 2010 Location: Lindenhurst, IL Posts: 792	Re: AeroKroil rust penetrate I have a 35 year old can of GM heat riser valve lube that works great and a little goes a long way hence the age of my supply. Today it is known as GM Fluid 88862628 Rust Penetrant and Inhibitor. Just another option.

03-29-2016, 02:49 PM	#26
Bob Wright Senior Member Join Date: May 2010 Location: Southern,Maine Posts: 141	Re: AeroKroil rust penetrate Sponsored Links (Register now to hide all advertisements) Bought a gallon about 40 years ago,still have 1/2 left. Kroil really works the best (also have tried the special home made blends)and the most of the others as well.

03-29-2016, 11:10 PM	#28
8aflyboy Junior Member Join Date: Nov 2013 Posts: 5	Re: AeroKroil rust penetrate aerokroil is so good it will leak out of it's own can.(LOL)

03-30-2016, 01:15 AM	#29
bikemaniac Senior Member Join Date: Aug 2013 Location: Copenhagen Posts: 177	Re: AeroKroil rust penetrate Based on internet reviews alone I decided to buy 2 bottles of 8oz Kroil Oil. However I live 10000 km away in Denmark/Europe and you cannot buy that stuff in Europe. Thus, I imported the two small bottles and paid huge amounts for shipping and import tax. This is truly the best stuff. Nobody knows it here. People just spray huge amounts of WD40 everywhere (or similar copies of WD40) and when I tell them about the wonders of Kroil Oil they just look at me like a nut case. Here in Europe, at least northern Europe, WD40 has became such an established brand that people dont say "rust penetrating oil" anymore, but just "WD40" and everybody knows what they mean. People just spray WD40 or similar products everywhere and still snap bolts/nuts all the time. They have no clue. But I don't like the smell of Kroil Oil at all. It smells very synthetic and chemical and tends to hang around for a long time. I use a plastic pipette with my non aerosol Kroil oil and manage to control the amount used very precisely - also upwards to some degrees. I think if you are using a pipette to make precision applications a 8 oz bottle will serious last a lifetime.

03-30-2016, 02:25 AM	#30
Chris Haynes Senior Member Join Date: May 2010 Location: Camarillo, CA and Pine Grove, CA Posts: 2,832	Re: AeroKroil rust penetrate I buy AeroKroil by the case. Buy any quantity you want from http://kanolabs.com/ __________________ 1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go?

03-30-2016, 07:32 AM	#31
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,189	Re: AeroKroil rust penetrate It is great stuff. My gallon can is called Kano Kroil and the aerosal stuff is called AeroKroil. Same great product, only different packaging.

03-30-2016, 07:59 AM	#32
SeaSlugs Senior Member Join Date: May 2010 Location: Central, IL Posts: 3,968	Re: AeroKroil rust penetrate kroil is amazing stuff, we used it at work all the time. smell you get used to haha, one smell i am used to but still dont like is hot liquid wrench... and yea it always seems to creep out of its own can especially if its in a warm place. __________________ 1929 Model AA - Need long splash aprons!

03-31-2016, 11:59 AM	#34
Roadster Rich Senior Member Join Date: May 2010 Location: Alpharetta, Georgia (Atlanta) Posts: 272	Re: AeroKroil rust penetrate I have used the Acetone and ATF mix for many years. Keep it in about a 20 oz. glass jar and shake it up and put into an old finger pump oil can when I need it. Can anyone tell me that they know the Kroil is even better than my mix? If so I will get a can.

03-31-2016, 02:38 PM	#36
wmws BANNED Join Date: Feb 2013 Location: Coatesville, Pa Posts: 719	Re: AeroKroil rust penetrate I agree with those using 50/50 mix of ATF and Acetone. Works way better than any commercial product. You do have to shake it up each time you use it as it will separate. Cost is very low.

03-31-2016, 02:51 PM	#37
mshmodela Senior Member Join Date: Mar 2014 Location: Cleveland, Ohio Posts: 2,763	Re: AeroKroil rust penetrate I've had good luck with PB Blaster... Now I'm a tad Cleveland biased http://blastercorp.com/about_Blaster_Corporation __________________ -Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio

03-31-2016, 03:35 PM	#39
mkmskm Senior Member Join Date: Aug 2010 Location: Kansas City Posts: 202	Re: AeroKroil rust penetrate I think it was Skinned Knuckles magazine that did a test a few years back on identically rusted and seized items and they ranked as best to worst based on force needed to break loose: 50/50 ATF/acetone Kroil PB Blaster - and it was a distant 3rd WD 40 I've always used Kroil with great success and the spray trea reaches places you can't with the ATF/acetone