|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-09-2020, 10:43 AM | #1 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Alternator that Fits Serpentine pulley
Just bought a 30 Model A that has a Cling's serpentine belt system. 6 volt positive ground alternator has problems, and I am trying to find a new one with a shaft that will accommodate the serpentine pulley. Advertisers don't describe length of shaft and diameters. Anyone out there who has matched a new alternator with a Cling's serpentine pulley who can tell me what alternator will work? Thanks
|
10-09-2020, 11:24 AM | #2 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: Alternator that Fits Serpentine pulley
Calling Cling would be the way to go.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-09-2020, 11:47 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,089
|
Re: Alternator that Fits Serpentine pulley
I run an alternator with Cling's system, and his pulley just slipped right on. I think all alternators have the same input size, at least all GM's do.
|
10-09-2020, 11:51 AM | #4 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Re: Alternator that Fits Serpentine pulley
I tried Cling's via e-mail and the address did not work. Went to their web site and their "contact" link doesn't work. Maybe they got the disease. I'll keep trying.....my alternator garage says it can repair the one I left for testing. Would rather have shinny new unit than old rebuilt.
|
10-09-2020, 12:00 PM | #5 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Re: Alternator that Fits Serpentine pulley
Is your alternator a Chevy S-10 type (3 wire) or a Delco CS 130 (2 wire) type. Thanks for your reply.
|
10-11-2020, 11:47 AM | #6 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Re: Alternator that Fits Serpentine pulley
Sponsored Links (Register now to hide all advertisements)
|
10-11-2020, 11:53 AM | #7 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 516
|
Re: Alternator that Fits Serpentine pulley
Regulators are cheap. POS and NEG ground both use the same regulator. Only the wiring and rectifier are different
|
10-11-2020, 12:06 PM | #8 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,089
|
Re: Alternator that Fits Serpentine pulley
Dennis Cling, [email protected]
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|