|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-23-2020, 11:25 PM | #1 |
Senior Member
Join Date: Apr 2013
Location: santa rosa ca
Posts: 257
|
Flywheel housing mounting
Can someone explain to me how when you have 2 bolts at the flywheel housing on each side and a bouncy spring mount in the front that you can not expect it to crack the flywheel housing after a period of time...however long that is. Seems to me that a single bolt on each side of the housing wold allow (flex or movement) and not stress the housing to the point of causing a crack. I have thought about either loosening the bolts or removing one all together. Any opinions? Thanks, Marc
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|