The Ford Barn

Ghost of elmirage · 03-09-2012, 02:20 PM

I need a 32 to 34 Ford passenger car clutch and brake pedal shaft its about 5&5/16 inches long. I already have the bushings but every place I called says the same thing, that they are all out and don't have a time frame when they will be restocked. Can someone hook me up? I don't want a used one thanx I already have one of those . Send me some pix and PM if you can help

Charlie Stephens · 03-09-2012, 02:50 PM

If you are looking for the part I think you are try a bearing supply company for a shaft and then have it cut to length.

Charlie Stephens

Ghost of elmirage · 03-09-2012, 02:58 PM

thanx Charlie

Andy · 03-09-2012, 03:22 PM

I have had success with a piece of 7/8" cold roll bar. It is accurate to size and smooth. Go around to fab shops and beg a piece.

Charlie Stephens · 03-09-2012, 03:36 PM

Another source might be a shaft from a different year that could be cut to length. Or maybe the shaft that mounts the throw out arm. NOS or NORS would probably beat current off shore manufacture.

Charlie Stephens

Ghost of elmirage · 03-09-2012, 03:40 PM

Sponsored Links (Register now to hide all advertisements)

OH dont get me wrong I can make one on the lathe easy enough I just don't have shit for time! I hate being a grown up lol

barnfind08 · 03-09-2012, 09:55 PM

I have n.o.s. ones 19.00 Part number B-7506 plus 5.50 postage

Ghost of elmirage · 03-09-2012, 11:11 PM

Excellent Can I see a picture of it ? And where do I send the check I will get it in the mail Tomorrow? I am sending you a PM
Thanx
Ghost

Ghost of elmirage · 03-10-2012, 06:54 AM

Many thanks to Fred from MN for hookin me up with the part I need from South Side Obsolete. Payment is on the way

03-09-2012, 02:20 PM	#1
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	1932 Clutch & Brake pedal shaft City: Worcester State: MA I need a 32 to 34 Ford passenger car clutch and brake pedal shaft its about 5&5/16 inches long. I already have the bushings but every place I called says the same thing, that they are all out and don't have a time frame when they will be restocked. Can someone hook me up? I don't want a used one thanx I already have one of those . Send me some pix and PM if you can help __________________ [email protected]

03-09-2012, 02:50 PM	#2
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,030	Re: 1932 Clutch & Brake pedal shaft If you are looking for the part I think you are try a bearing supply company for a shaft and then have it cut to length. Charlie Stephens

03-09-2012, 02:58 PM	#3
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	Re: 1932 Clutch & Brake pedal shaft thanx Charlie __________________ [email protected]

03-09-2012, 03:22 PM	#4
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,768	Re: 1932 Clutch & Brake pedal shaft I have had success with a piece of 7/8" cold roll bar. It is accurate to size and smooth. Go around to fab shops and beg a piece.

03-09-2012, 03:36 PM	#5
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,030	Re: 1932 Clutch & Brake pedal shaft Another source might be a shaft from a different year that could be cut to length. Or maybe the shaft that mounts the throw out arm. NOS or NORS would probably beat current off shore manufacture. Charlie Stephens

03-09-2012, 03:40 PM	#6
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	Re: 1932 Clutch & Brake pedal shaft Sponsored Links (Register now to hide all advertisements) OH dont get me wrong I can make one on the lathe easy enough I just don't have shit for time! I hate being a grown up lol __________________ [email protected]

03-09-2012, 09:55 PM	#7
barnfind08 Senior Member Join Date: May 2010 Posts: 893	Re: 1932 Clutch & Brake pedal shaft I have n.o.s. ones 19.00 Part number B-7506 plus 5.50 postage

03-09-2012, 11:11 PM	#8
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	Re: 1932 Clutch & Brake pedal shaft Excellent Can I see a picture of it ? And where do I send the check I will get it in the mail Tomorrow? I am sending you a PM Thanx Ghost __________________ [email protected]

03-10-2012, 06:54 AM	#9
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	Re: 1932 Clutch & Brake pedal shaft Many thanks to Fred from MN for hookin me up with the part I need from South Side Obsolete. Payment is on the way __________________ [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode