|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-13-2011, 06:37 PM | #1 |
Senior Member
Join Date: May 2010
Location: Aptos, CA
Posts: 332
|
Needed 94 float level
I seem to have lost my 94 cheat sheet I have kept all these years and the float level was one of those simple facts lost. I think it's 11/16 from the bottom of the carb base to the bottom of the float but I want to check before installing them. The measurement is of course up-side down with the needle and seat in a closed position. So if you have the magic number please validate my memory or correct it!
Thanks again, Tim |
07-13-2011, 06:44 PM | #2 |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: Needed 94 float level
1 3/8" from the surface to the top of the float. John
|
Sponsored Links (Register now to hide all advertisements) |
|
07-13-2011, 06:56 PM | #3 |
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
|
Re: Needed 94 float level
1 7/16 is better,slightly lower. ken ct.
|
07-13-2011, 08:43 PM | #4 |
Senior Member
Join Date: May 2010
Location: Aptos, CA
Posts: 332
|
Re: Needed 94 float level
Sponsored Links (Register now to hide all advertisements)
I knew my memory couldn't be trusted. Have a great one, Tim |
|
|
Sponsored Links (Register now to hide all advertisements) |
|