The Ford Barn

Old Newbie · 09-12-2020, 05:03 PM

Finished first time wiring on a 6 volt, positive ground coupe. Incandescent bulbs in cowl lights as parking lights, LED bumper mount blinkers in front, LED tail lights in the rear. All new from Snyders. Parking lights in the cowl and rear work beautifully. Brake lights work beautifully. Emergency flashers work beautifully. Blinkers don't work at all. I have the 6 ohm resistors installed. Using the 6 volt, BV535 flasher included with the Signal Stat 900 switch. I've read a thousand posts on turn signals and LED lights but have not seen this issue discussed. Any ideas? I've learned so much from this forum over the years I'm sure someone can help. Thanks to all!

09-12-2020, 05:03 PM	#1
Old Newbie Member Join Date: Jan 2014 Location: Cranberry Twp., PA Posts: 31	Four-Ways Work, Turn Signals Don't !!! Finished first time wiring on a 6 volt, positive ground coupe. Incandescent bulbs in cowl lights as parking lights, LED bumper mount blinkers in front, LED tail lights in the rear. All new from Snyders. Parking lights in the cowl and rear work beautifully. Brake lights work beautifully. Emergency flashers work beautifully. Blinkers don't work at all. I have the 6 ohm resistors installed. Using the 6 volt, BV535 flasher included with the Signal Stat 900 switch. I've read a thousand posts on turn signals and LED lights but have not seen this issue discussed. Any ideas? I've learned so much from this forum over the years I'm sure someone can help. Thanks to all!