|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-05-2014, 11:31 AM | #1 |
Senior Member
Join Date: May 2010
Location: Amana IA
Posts: 527
|
TPI Tappet Verification
After looking thru all catalogs (both printed & online), and then doing a search here on Fordbarn (which I should have done first); I finally found the info I was seeking.
A thread referred me to Vince's sight which stated; an adjustable self-locking tappet has a 24 pitch bolt (24-threads per inch). I am guessing the double-nut adjustable tappet also has 24 pitch bolt too. Am I correct? Thanks,
__________________
Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/ |
03-05-2014, 03:12 PM | #2 |
Senior Member
Join Date: May 2010
Location: Amana IA
Posts: 527
|
Re: TPI Tappet Verification
One thing I want to add is Fordbarn is a absolute wealth of information. Not only daily from Model A'ers asking questions, but in the archives.
It just takes a little practice using the search function. Questions again - Am I correct that the double-nut adjustable tappet has a bolt with 24-threads per inch? Thanks,
__________________
Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/ |
Sponsored Links (Register now to hide all advertisements) |
|
03-08-2014, 07:09 AM | #3 |
Senior Member
Join Date: May 2010
Location: Amana IA
Posts: 527
|
Re: TPI Tappet Verification
Sponsored Links (Register now to hide all advertisements)
All the vendors answered my enquiry and stated the TPI of the bolt used in said tappet is 24.
__________________
Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/ |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|