Self sealing oil pan gaskets from snyders help

[mll1446]

I am about to install a new self sealing oil pan gasket from Snyders anyone have any tips or problems with this gasket? I have never used, thanks

[CarlG]

I have used them several times without a hint of a problem. Instructions say not to use any additional sealant, however I always coat both sides of the gasket with a thin film of lithium grease.

[Bill in SoCal]

Originally Posted by CarlG

I have used them several times without a hint of a problem. Instructions say not to use any additional sealant, however I always coat both sides of the gasket with a thin film of lithium grease.

Like Carl, I use a thin film of axel grease. It helps keep the gasket in place while installing, and helps with removal of the gasket later. Bill

[Cape Codder]

Is the new self sealing gaskets similar to the head gaskets which are sealable?
Also can someone provide Snyder P/N?
Thanks for your help.
Joe Grobleski

[Bill in SoCal]

Originally Posted by cape codder

can someone provide snyder p/n?
Thanks for your help.
Joe grobleski

(888) 262-5712

[CarlG]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Cape Codder

Is the new self sealing gaskets similar to the head gaskets which are sealable?
Also can someone provide Snyder P/N?
Thanks for your help.
Joe Grobleski

A-6781-C "Upgraded Design with Rubber Cork Gaskets & Teflon Rope Seal"