|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-26-2020, 09:29 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Pressurizing the oil system before initial startup
Over the years I have seen various posts on pre-pressurizing the oil system in the flatmotor before initial startup. The 59L has a 95% full flow oil pressure system, and I would likely tap into the output fitting at the block. I have a mechanical oil pressure gauge. Any suggestions on pressurizing methods. Thank you Fordbarners.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|