|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-09-2020, 07:26 PM | #1 |
Senior Member
Join Date: May 2018
Location: Coral Springs, Florida
Posts: 552
|
Ford verse Chevrolet
Why are the Model A survival rates greater that the Chevrolet's of the same era ? And it's not due to the people/clubs I know either, as I only know of
one Chev to the four A's I've owned. |
09-09-2020, 07:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Lee County Alabama
Posts: 828
|
Re: Ford verse Chevrolet
The use of very much interior wood framing...
|
Sponsored Links (Register now to hide all advertisements) |
|
09-09-2020, 07:33 PM | #3 |
Senior Member
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,817
|
Re: Ford verse Chevrolet
One reason that I have read is that the GM bodies had more wood in them, so they rotted away. I don't think that explains it all, though. Model As seem to have a significant amount of wood in them, too.
In my own subjective reasoning, it is that they were much better cars in their design and construction and overall reliability. Someone more knowledgeable than me may have some better information, but I will stick to my reasoning for now. Occasionally I will see a 28 Chev. 29's seem the most numerous in my experience, but there don't seem to be a lot of them out there.
__________________
1924 Model T Coupe 1928 Model A Roadster 1930 Model A Town Sedan 1939 Deluxe Fordor 1945 pickup 1951 Custom convertible |
09-09-2020, 11:04 PM | #4 |
Member
Join Date: Jul 2019
Location: Central New Mexico
Posts: 83
|
Re: Ford verse Chevrolet
In my circles it's been attributed to the body design using wood in key structural areas. Namely the door posts. When they set in a barn or the field the wood gets loose, if they bounce down the road, the wood gets loose. The two most common complaints I've heard about Chevy's of that vintage are, my door won't shut, followed by, my door fell off.
Another factor, from my experience anyway, is parts availability. Model A parts seem to be much more affordable and readily available. And that makes the "old car" experience much more fun, especially for someone new to the old car hobby. Sent from my E6810 using Tapatalk |
09-09-2020, 11:19 PM | #5 |
Senior Member
Join Date: Feb 2014
Location: Warrnambool, Victoria, Australia
Posts: 800
|
Re: Ford verse Chevrolet
|
09-10-2020, 07:38 AM | #6 |
Senior Member
Join Date: May 2011
Location: Elyria, Ohio
Posts: 756
|
Re: Ford verse Chevrolet
Sponsored Links (Register now to hide all advertisements)
Marty |
09-10-2020, 07:56 AM | #7 |
Member
Join Date: Jul 2019
Location: Central New Mexico
Posts: 83
|
Re: Ford verse Chevrolet
Chevrolet made some changes. I think it was 29 they started offering a 6 cylinder in the cars, and Chevrolet actually out sold Ford for a number of years. I don't think Ford regained leadership in new sales until 32 when the V8 came out.
Our beloved little Model A's were in fact an attempt to recover sales, mostly lost to Chevrolet, customers wanted power, brakes, and comfort offered by others, namely Chevrolet, that the Model T's just didn't provide. Disclosure: this is speculation recalled from a somewhat foggy memory. Feel free to fact check. Sent from my E6810 using Tapatalk |
09-10-2020, 08:38 AM | #8 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Ford verse Chevrolet
Chevrolet cars cost more than Ford and was more complicated .
|
09-10-2020, 08:50 AM | #9 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Ford verse Chevrolet
Two things; A)the physical survival of the cars, Namely, not so much wood in the bodies. The use of Vanadium still helped to retard rust (though not completely) damage. So the cars and their parts were actually there!
B) The model A was a pretty well designed and built automobile that could take a fair amount of punishment. Knowing what I know, I would have suggested a few changes, such as making the bell housing one piece instead of two, trans Bolts on outside ears instead of inside the bell housing. A different water pump design. Slightly more attention paid to aerodynamics. Tilting the windshield, ( as was done in some of the 1931 models). But Henry was only building a car to last ten years, not a statement for the ages. I think he did a pretty job! One thing that was a major help over Chevrolet was in gas mileage. A ford model A could be tuned to get in the area of 20MPG and this helped get us through the was when Chevies were being scrapped by the thousands. Terry |
09-10-2020, 08:57 AM | #10 | |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Ford verse Chevrolet
Quote:
Terry |
|
09-10-2020, 09:15 AM | #11 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: Ford verse Chevrolet
I have a 1931 Chevrolet in my collection and it is a far classier looking car than my Model A’s. It is rare you see one at a car show so when one appears it attracts lots of attention.
|
09-10-2020, 09:35 AM | #12 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: Ford verse Chevrolet
Quote:
Something that folks need to understand. The Chevrolet was a much better automobile than the Model-A. The '29 Chevrolet engine was 15% more horsepower than Ford's A, -the color selection was better, and the trim levels were more plush. Ford realized this in 1930, -hence the reason for the DeLuxe models to be introduced. One other HUGE factor in Ford's success was his distribution. Ford had something like 4x the amount of dealers as Chevrolet during the Model-A era. Ford set up Agencies in rural areas where Chevrolets were not. People had learned about not being able to get parts for their implements and automobiles locally and conveniently. The final thing is it was a different clientele of the two manufacturers. Car owners from the teens and early 20s were used to vehicles without windows or fixed roofs. In other words they froze during the winter and got wet when it rained. By the Model-A era, if Buyers could afford it, they bought closed cars because they were tired of the cold and wet weather when driving. Even with that said, Ford still sold many Roadsters, Phaetons, and Biz Coupes (-draft canvas tops) because they were inexpensive. Chevrolet sold very few Roadsters & Touring cars during the Model-A era. Their Coaches were their big sellers because they were a better value over a Ford IF you had a local dealership to service you, and if you could afford it. Very possible that Chevrolet could have dominated Ford in all years had there been Chevy dealerships in each of the small rural towns. Frugality of the typical Model-A owner is what preserved most Model-As. That, ...and the rural ownership that kept them away from urban areas where 'scrap-drives' were more prevalent. |
|
09-10-2020, 09:52 AM | #13 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,552
|
Re: Ford verse Chevrolet
I am wondering if in addition to the above mentioned items, Ford had the reputation of building a sturdy, well supplied (parts), going to be there car. Whereas Chevy was promoting things changing every year or so, so they did not put the emphasis on the long lasting quality. Then the country ran smack into the depression, which tilted people towards Ford's reputation of long lasting reliability.
It was also a corporation vs. Henry's ego. A company doesn't care about quality that much as long as you buy it and keep coming back (i.e. built in obsolescence). Ego cares what you think about its product. Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
09-10-2020, 10:18 AM | #14 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,470
|
Re: Ford verse Chevrolet
Big Three engines of 1928 and 1931. A story I have often heard from from folks who lived through the Great Depression is that a replacement fuel pump cost about $15 in the late 1930s, but one could buy a running Model "A" for that money. The Chevrolet and Plymouth had fuel pumps. Note that the horsepower monster was the Plymouth.
I raced my 1931 Model "A" Coupe against a 1932 Chevy Master Coupe on a highway from about 30 MPH up to 60 MPH and it was tie.
__________________
Bob Bidonde Last edited by Bob Bidonde; 09-10-2020 at 10:25 AM. |
09-10-2020, 10:44 AM | #15 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
Re: Ford verse Chevrolet
Hi Guys,
I have one of each. I can’t really compare them, as the Ford is a roadster pickup and the Chevy is a 29’ six cylinder Phaeton. Ford built 5 million Model A cars in 4 years and must have built enough spare parts to keep them on the roads. Where the Chevies of the 30s were changed every 2 yrs. eg, 27/28 were very much the same, 29/30 etc and the numbers built much less than Ford, therefore less parts to be kept in stock. And then the killer, I believe that when you traded a Chevy on a new one, the old one would be destroyed. By selling more new ones, less parts required to be kept in stock and in the end less used parts in junk yards. I am not sure if the previous paragraph is true, but could very well be.
__________________
Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC |
09-10-2020, 11:13 AM | #16 |
Senior Member
Join Date: Aug 2016
Location: West Virginia
Posts: 430
|
Re: Ford verse Chevrolet
One of my Dad’s first jobs was running a service station in partnership with his older brother. The owner was a “Ford man”. Dad said the reason he preferred Fords was Henry’s extensive use of roller bearings. He said a Ford would be in service 30% longer than other vehicles because of this. I know Chevy hung on to ball bearings on their truck spindles into late 60’s and the the ‘30 AA has taper rollers that will way out last ball bearings there.
Also note: one of Ford’s sales pitches in model A era was comparing prices of their competitors replacement parts with theirs. |
09-10-2020, 11:22 AM | #17 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: Ford verse Chevrolet
Quote:
|
|
09-10-2020, 12:13 PM | #18 | |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Ford verse Chevrolet
Quote:
__________________
I know the voices aren't real but damn they have some good ideas! |
|
09-10-2020, 12:15 PM | #19 | |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Ford verse Chevrolet
Quote:
__________________
I know the voices aren't real but damn they have some good ideas! |
|
09-10-2020, 12:49 PM | #20 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,789
|
Re: Ford verse Chevrolet
I have a 1931 Chevrolet in my collection and it is a far classier looking car than my Model A’s. It is rare you see one at a car show so when one appears it attracts lots of attention.
agreed. have 6 A's in various states and one 31 chevy roadster. The chevy is a superior car, but the wood framing killed it. very hard to find parts for the chevy, but I much prefer it. As Brent said, it was a good bit more expensive as well. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|