|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-04-2010, 01:41 PM | #1 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
32 3 window rear wheel wells
anyone know of a source for inner fenders for a 3 window? or do you have to make due with something different?
Thanks... Last edited by 32Gnu; 10-04-2010 at 08:00 PM. |
10-04-2010, 01:47 PM | #2 |
Senior Member
Join Date: May 2010
Location: Jensen Beach, FL
Posts: 565
|
Re: 32 3 window inner fenders
I'm not sure exactly what you're looking for? More info please.
Lee
__________________
Salt Is Good... Mk 9:50 |
Sponsored Links (Register now to hide all advertisements) |
|
10-04-2010, 01:55 PM | #3 |
Senior Member
Join Date: May 2010
Location: Santa Fe Springs, California
Posts: 280
|
Re: 32 3 window inner fenders
I do not think 1932 Ford Deluxe coupes have inner fenders.
__________________
I am a believer |
10-04-2010, 02:01 PM | #4 |
Senior Member
Join Date: May 2010
Location: Jensen Beach, FL
Posts: 565
|
Re: 32 3 window inner fenders
That was my thought unless it's rear quarter fenderwell area patch panels or...?
Lee
__________________
Salt Is Good... Mk 9:50 |
10-04-2010, 06:04 PM | #5 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: 32 3 window inner fenders
I am sorry.. the rear wheel wells, mine are rotted on the lower portions..
I want to patch them but would like at least a close form.. |
10-05-2010, 09:23 AM | #6 |
Senior Member
Join Date: May 2010
Location: Central Iowa
Posts: 691
|
Re: 32 3 window rear wheel wells
Sponsored Links (Register now to hide all advertisements)
__________________
Mike Wanted: - '32-34 Open Cab Pickup (RPU) parts and documents/articles/info - ARDUN parts |
10-05-2010, 11:12 AM | #7 | |
Senior Member
Join Date: May 2010
Location: Jensen Beach, FL
Posts: 565
|
Re: 32 3 window rear wheel wells
Quote:
Lee
__________________
Salt Is Good... Mk 9:50 |
|
10-05-2010, 11:26 AM | #8 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: 32 3 window rear wheel wells
Check over on the HAMB - could be a couple sources others there may know about.
|
10-06-2010, 10:15 AM | #9 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: 32 3 window rear wheel wells
I called Brookville and they sid no.. surely they have some blem 1/4's for 1/2 price...
Thanks guys |
10-07-2010, 09:01 AM | #10 |
Junior Member
Join Date: Sep 2010
Location: Kernersville, N.C.
Posts: 17
|
Re: 32 3 window rear wheel wells
Try Dennis Carpenter 1-800-476-9653. I have been told he has alot of the original Ford stamps and dies, and his products are licensed by Ford. He is in Concord N.C. so if you are in S.C. he is not far from you. I have bought some things from him, but not body parts.
|
10-07-2010, 05:03 PM | #11 |
Member
Join Date: May 2010
Location: upper peninsula of michigan
Posts: 80
|
Re: 32 3 window rear wheel wells
mac's has some sheet metal inner "fenders".
|
10-07-2010, 06:45 PM | #12 |
Senior Member
Join Date: May 2010
Posts: 4,482
|
Re: 32 3 window rear wheel wells
I used the standard 5window/roadster wheel well repair panels and made them work. Behind the wheels and under the fenders nobody knows.
|
10-08-2010, 09:31 PM | #13 |
Junior Member
Join Date: May 2010
Location: Northern B.C., Canada
Posts: 12
|
Re: 32 3 window rear wheel wells
Here's a build sequence I posted on another web site when I built one for my 3w......
Out to the shop this morning to attack the passenger side wheel well. This will be the third time I've patched this side. I think I finally have the door fit and fender fit correct that the quarter panel must be in the right spot. Old patch laid on sandbag to make a pattern for a new piece. Butcher paper held on with mini magnets A dirty finger traces the outside shape. Pattern cut out and stuck to old patch again. Trace area of higest crown and the tip line that becomes the flat mounting flange. Trace onto 18 ga. Rough cut with foot shear. Final cut with electric shear. ATF for lube. Planishing hammer to raise crown. Tipping die in bead roller and English wheel to smooth out planishing marks. Final planishing with T-Dolly and hammer Punched holes for plug welds
__________________
You can touch the coupe, just don't fondle the chicken. Last edited by tinmann; 10-08-2010 at 09:37 PM. |
10-08-2010, 09:42 PM | #14 |
Junior Member
Join Date: May 2010
Location: Northern B.C., Canada
Posts: 12
|
Re: 32 3 window rear wheel wells
Sneaking up on final fit. Ran out of time for today.......
You'll notice a serious change in the color of the panel. Halfway through the forming it seemed that the metal stopped behaving itself (got hard). So I annealed it with a torch and away I went again. Here we go again.... now for the rear portion of the wheel well. A little planishing.... Straightened it a bit with 12 tons.... A bit more shape.... T-Dolly for shape.... A little wheeling..... A little tipping....... Flattening the mounting flange..... Trial fit and mark for trimming..... Remove both trim and tack together......
__________________
You can touch the coupe, just don't fondle the chicken. |
10-08-2010, 09:44 PM | #15 |
Junior Member
Join Date: May 2010
Location: Northern B.C., Canada
Posts: 12
|
Re: 32 3 window rear wheel wells
When I know that parts will need additional shaping after welding, I like to use oxy-acet because the weld is so soft.....
A little clean up and......... Viola.... patch panel...... I can't believe how many hours I have into one "simple" patch panel but here we go again....... Clecoed and clamped into place..... Only to realize there just isn't enough crown yet..... break out the BFH..... And when that didn't work..... cut slits..... Mig tacks......
__________________
You can touch the coupe, just don't fondle the chicken. |
10-08-2010, 09:44 PM | #16 |
Junior Member
Join Date: May 2010
Location: Northern B.C., Canada
Posts: 12
|
Re: 32 3 window rear wheel wells
Followed by gas welding and lots of smacking.....
Another trial fit..... more frustration..... Screw it...... weld it in....... Last little section fabbed and installed...... Little bit of clean up...... And when the day's work has been frustrating, there's only one tool that can help..... Now I've got to find someone willing to crawl into the trunk with a hammer and dolly so I can finish this install........ thanks for looking.
__________________
You can touch the coupe, just don't fondle the chicken. |
10-09-2010, 04:37 PM | #17 |
Senior Member
Join Date: May 2010
Location: Manitoba
Posts: 105
|
Re: 32 3 window rear wheel wells
That tin of beer looks sure tasty after all that work, have another one , you deserve it.
|
10-09-2010, 05:29 PM | #18 |
BANNED
Join Date: May 2010
Location: nor~cal
Posts: 455
|
Re: 32 3 window rear wheel wells
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|