|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Feb 2012
Location: Lansing MI
Posts: 188
|
![]()
On the body sides of the decklid opening, there is a hole near the top on both sides. I have seen it on others, not just my car.
What is it for? |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Huntsville Al
Posts: 1,526
|
![]()
A rubber baby buggy bumper
__________________
Matt 24:36-41 |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Feb 2012
Location: Lansing MI
Posts: 188
|
![]()
on the side?
There is a big one near it |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,215
|
![]()
picture?
Lawrie |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Feb 2012
Location: Lansing MI
Posts: 188
|
![]()
The one on the side
|
![]() |
![]() |
![]() |
#6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
![]() Sponsored Links (Register now to hide all advertisements)
Last edited by JSeery; 04-17-2018 at 09:01 PM. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Nov 2010
Location: Victoria, British Columbia
Posts: 176
|
![]()
Never had one like that in my '33.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
![]()
That hole is close to where the pivot hole is on a 32 for a decklid. Never had a 33 or 34 with a trunk so can't say if it looks like it belongs there.
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
![]()
ignore
Last edited by DavidG; 04-18-2018 at 10:03 AM. Reason: superceded |
![]() |
![]() |
![]() |
#10 |
Member
Join Date: May 2010
Location: Lasalle Ontario Canada
Posts: 94
|
![]()
My 34 5 window had alum. wedges to center lid as it closed don't know if they were original have round rubber in then now, I will see if I can find them and post pics. They were 1/8 thick tapered up to top.Darrell
|
![]() |
![]() |
![]() |
#11 |
Member
Join Date: May 2010
Location: Lasalle Ontario Canada
Posts: 94
|
![]()
Found half of one might be white metal.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
![]()
Oops! I did some more checking of my photos and while my Canadian-built '33 coupe does not have the holes, a U.S.-built '34 roadster I had did have those same holes.
The wedges fordcpe refers to were used on all '32 coupes, roadsters, and cabriolets, with or without rumble seats (at the bottom corners in the case of the latter) and similarly on Model As. Evidently on some, but not all '33s and '34s as well. (They are very hard on the paint of the deck and rumble lids where they interact.) |
![]() |
![]() |
![]() |
#13 |
Member
Join Date: May 2010
Location: Lasalle Ontario Canada
Posts: 94
|
![]()
More Pics
|
![]() |
![]() |
![]() |
#14 |
Member
Join Date: May 2010
Location: Lasalle Ontario Canada
Posts: 94
|
![]()
My car is from USA and I see the holes are located different but his car is Cabriolet.
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
![]()
In the U.S. '34 body parts catalog it (40-713970, guide, deck door) is listed for both '33-'34 for all cabriolets, coupes, and roadsters suggesting that it was also used with trunk lids down near the bottom corners (as was the practice for '32 and earlier).
They are easily made from aluminum stock or by using the Model A reproductions and rounding off the upper corners (they had squared-off corners). |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jan 2018
Posts: 413
|
![]()
My '34 Cabriolet has them, my '34 Roadster has them, my '34 3-W coupe has them
All have rumble lids. My 5-w coupes with trunks do not have them. |
![]() |
![]() |
![]() |
#17 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
![]()
That's what I went and checked was a 33 5w and it doesn't have them. Interesting new information!
|
![]() |
![]() |
![]() |
#18 |
Senior Member
|
![]()
I have some reproduced by Ed solaray s/s Should be ally ,Ted
|
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
![]()
It would seem that a bit of confusion exists herein as to the hole in question. I'm pretty sure that both millersgarage and fordcpe are referring to the small hole in the vertical side of the recess in the quarter panel, not the large hole into which the rubber bumper fits in the horizontal triangular corner gusset (rubber bumper fitted with rumble lids only).
|
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Feb 2012
Location: Lansing MI
Posts: 188
|
![]()
DavidG, exactly, the one on the edge of the quarter, not the bug bumper hole.
Thanks to fordcpe, that is the kind of info I was looking for. The photo I posted was not of my car, but of a friend's coupe, to show he had them too. |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|