|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
08-28-2022, 10:14 AM
|
#1 |
|
Senior Member
Join Date: Mar 2022
Location: Richmond,Virginia
Posts: 136
|
Holes in SS trim
Unfortunately the previous owner fastened some of the stainless steel trim with screws. Anyone have experience with repairing the holes?
|
|
|
|
08-28-2022, 01:54 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: westbury ny
Posts: 854
|
Re: Holes in SS trim
if you have a tig torch you could weld them also could be done with a mig using ss wire and correct gas sand and polish
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
08-28-2022, 04:51 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 908
|
Re: Holes in SS trim
I have fixed them using my Cobra torch and stainless rod.
|
|
|
|
|
08-28-2022, 06:28 PM
|
#4 |
|
Senior Member
Join Date: Mar 2022
Location: Richmond,Virginia
Posts: 136
|
Re: Holes in SS trim
The metal so thin I would be afraid of warpage or burn through if I used a torch. I'll have to find some scrap pieces to practice on. I don't have a tig outfit but I could get some stainless wire for my mig welder.
|
|
|
|
|
08-28-2022, 07:05 PM
|
#5 |
|
Member
Join Date: Oct 2020
Posts: 73
|
Re: Holes in SS trim
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 02:12 AM.