cabs 1940- 1941

[toms32]

can some one tell me if the 1940 and 1941 1/2 ton pickups have the same cab thanks Tom

[alanwoodieman]

yes, the only difference is the 40 cab has a raised area in the middle of the dash for the cast Ford script, the cabs to 1947 had a flat area with two holes for a Ford badge. 42 to 47 had a different seat, instead of sitting on the gas tank you sat above it on a frame surround. a few other differences in 42/47 are the mounting holes/brackets for the fenders

[40larry]

Originally Posted by toms32

can some one tell me if the 1940 and 1941 1/2 ton pickups have the same cab thanks Tom

Basically identical. Two minor differences are the holes in windshield frame for the heater nozzles became larger in 1941 to fit the later nozzles. A second difference is the stamping of dash center is different because the dash center trim is different. The 40 uses a script 'Ford" and the 41 uses a rectangular piece with Ford script....... Perhaps some minor differences on the firewall but I am not sure. That should do it.....

[toms32]

Many thanks Guys for the info, Tom

[MGG]

The access covers in the doors for 1940 are held by 5 screws while the covers for the 41 thru 47 doors are held by 8 screws.

[Newc]

Sponsored Links (Register now to hide all advertisements)

Didn't the '41 get a 6 cyl indent in the firewall? Newc