Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-13-2020, 12:26 PM   #22
jrvariel48
Senior Member
 
jrvariel48's Avatar
 
Join Date: Jan 2012
Location: New Jersey
Posts: 1,423
Default Re: Crank pulley bolt...Lost again!!

Quote:
Originally Posted by Ronnieroadster View Post
Joe in the past when I have experienced the exact same issue as yours even with the blower belt helping the dampening. The problem was due to a balance issue which turned out to be the flywheel area. Even red locktite would not help. I would suggest try green locktite its a lot stronger than red if the bolt still comes loose after going to green then checking the bolt regularly to be sure its tight would at least keep the bolt in place and not on the road someplace.
Ronnieroadster
Great advice as usual Ron, thank you
jrvariel48 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:23 PM.