|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-16-2018, 09:16 PM | #21 | |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: How do I buy Bob Sherman thermostats?
Quote:
I do the same except I just squeeze a smaller piece of old radiator hose about 2 in . long in the hose . No clamp needed . |
|
04-16-2018, 11:16 PM | #22 |
Senior Member
Join Date: Oct 2013
Location: Glens Falls NY
Posts: 1,267
|
Re: How do I buy Bob Sherman thermostats?
Bored&Stroked and Ford Freak: I do same but use a 1 inch high piece of straight radiator hose, glued inside the stock hose with rubber cement, then one clamp inn normal location to hole the whole thing. The thickness of the inner hose piece does not hinder the flow of coolant through the stats, which are Stant units. Found that method in an older thread here on the Barn.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-02-2018, 05:21 PM | #23 | |
Junior Member
Join Date: Jun 2018
Posts: 1
|
Re: How do I buy Bob Sherman thermostats?
Quote:
Very useful guide. Thank you!
__________________
Crazy Bulk Supplements line https://diets-usa.com/crazy-bulk-reviews/ is useful for you |
|
06-03-2018, 09:42 PM | #24 |
Senior Member
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
|
Re: How do I buy Bob Shewman thermostats?
I've since suggested one improvement on this idea. Twist the single strand of wire on itself on each side so that only one strand has to be compressed by the hose instead of two. It also holds the wire in place better during installation.
__________________
Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness |
10-11-2018, 11:42 AM | #25 | |
Junior Member
Join Date: Apr 2018
Posts: 3
|
Re: How do I buy Bob Shewman thermostats?
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|