Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-24-2020, 10:56 AM   #1
Jockeyshift41
Member
 
Jockeyshift41's Avatar
 
Join Date: Mar 2020
Location: SW Florida
Posts: 51
Default Holley 94 air screws

Hello fellas. New here to the Ford Barn. I’ve been rebuilding a few carbs for a 2x2 intake I’m swapping into my 52 F2. One carb had the idle air screws modified with a groove cut down the entire length. Never seen this before in my 35 years as a mechanic. Was wondering if this was some old shade tree mechanic’s trick to lean out carb due to no access for parts or what? Anyone seen this before or know why? Good thing I have an abundance of parts.
Jockeyshift41 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:38 PM.