The Ford Barn

Fullraceflathead · 03-31-2017, 10:43 AM

Anyone one have one they will sell me that is going to the Pancake Breakfast this Sunday???
I'll meet you there and pickup and pay you.

DougVieyra · 03-31-2017, 10:52 AM

Can you be more explicit in what you mean by "cut out" ? I am familiar with three different meanings to the term "cut out".

Fullraceflathead · 03-31-2017, 01:32 PM

The Cutout on the 6 Volt Generator.

Jacksonlll · 03-31-2017, 02:05 PM

I'm sure I have one in Mi that you could have, but I'm in SC. There should be a lot out there, since most of us are running the alternator.

BILL WILLIAMSON · 03-31-2017, 02:07 PM

Whut if 17 Guys show up with cut outs for sale?? & one Dummy shows up with the "cut out" from when he sawed the firewall, for an exhaust manifold heater door???
Bill W.

Y-Blockhead · 03-31-2017, 05:24 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Fullraceflathead

Anyone one have one they will sell me that is going to the Pancake Breakfast this Sunday???
I'll meet you there and pickup and pay you.

I have two old generators in my garage that I just checked but neither has a cutout. Hmmm, as a side note, one appears to be a Canuook Genny, it has Robertson screws holding the field coils in?

Our Club meeting is tonight. I will ask if anyone has one they will donate to the cause...

Not sure if the Club Garage will be open tomorrow tho. I'll get back to you @ ~9pm. Can I assume you want one in working order? haha!

Fullraceflathead · 03-31-2017, 11:36 PM

I'd like one that works but I also have the Diode to use on one that doesn't work. It will look correct if it has the original mounts and can top.

Y-Blockhead · 04-01-2017, 12:36 AM

Sorry, no one at the meeting has a 'spare' cut out.

Tom Wesenberg · 04-01-2017, 01:23 AM

Bert's has restored original cutouts. 800-321-1931

BILL WILLIAMSON · 04-01-2017, 11:09 AM

Quote:

Originally Posted by Y-Blockhead

Sorry, no one at the meeting has a 'spare' cut out.

It's sometime HARD to get folks to part with STASHED parts!!! They're much like a "SECURITY BLANKET"----Are we all KRAZY?
Bill W.

dkibby · 04-04-2017, 12:44 AM

Here's what i have.
i tried to show the ding near the top of the cap.
I took it apart a while back and cleaned up the inside too.

v/r

darwin kibby

Mike V. Florida · 04-04-2017, 01:40 AM

Quote:

Originally Posted by dkibby

Here's what i have.
i tried to show the ding near the top of the cap.
I took it apart a while back and cleaned up the inside too.

v/r

darwin kibby

That is a nice looking older part that would work fine, but not original to the Model A years.

barnstuf · 04-04-2017, 11:49 AM

The pictured cutout in my opinion is a Ford made replacement made in he 1930's primarily for the V8 replacement market. Cutouts were used to 1939 and the ones in the V8 years had mounting holes whereas the Model A ones had slots. For a driver it would be fine but for a restoration it is not suitable.

03-31-2017, 10:43 AM	#1
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,176	Used Cut out needed for a restoration. Anyone one have one they will sell me that is going to the Pancake Breakfast this Sunday??? I'll meet you there and pickup and pay you. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

03-31-2017, 10:52 AM	#2
DougVieyra Senior Member Join Date: Sep 2012 Location: Eureka, California Posts: 1,716	Re: Used Cut out needed for a restoration. Can you be more explicit in what you mean by "cut out" ? I am familiar with three different meanings to the term "cut out".

03-31-2017, 01:32 PM	#3
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,176	Re: Used Cut out needed for a restoration. The Cutout on the 6 Volt Generator. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

03-31-2017, 02:05 PM	#4
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Used Cut out needed for a restoration. I'm sure I have one in Mi that you could have, but I'm in SC. There should be a lot out there, since most of us are running the alternator.

03-31-2017, 02:07 PM	#5
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Used Cut out needed for a restoration. Whut if 17 Guys show up with cut outs for sale?? & one Dummy shows up with the "cut out" from when he sawed the firewall, for an exhaust manifold heater door??? Bill W. __________________ "THE ASSISTANT GURU OF STUFF"

03-31-2017, 11:36 PM	#7
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,176	Re: Used Cut out needed for a restoration. I'd like one that works but I also have the Diode to use on one that doesn't work. It will look correct if it has the original mounts and can top. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

04-01-2017, 12:36 AM	#8
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,844	Re: Used Cut out needed for a restoration. Sorry, no one at the meeting has a 'spare' cut out.

04-01-2017, 01:23 AM	#9
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Used Cut out needed for a restoration. Bert's has restored original cutouts. 800-321-1931

04-04-2017, 11:49 AM	#13
barnstuf Senior Member Join Date: May 2010 Location: Cape Cod MA Posts: 2,840	Re: Used Cut out needed for a restoration. The pictured cutout in my opinion is a Ford made replacement made in he 1930's primarily for the V8 replacement market. Cutouts were used to 1939 and the ones in the V8 years had mounting holes whereas the Model A ones had slots. For a driver it would be fine but for a restoration it is not suitable.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode