11-02-2013, 12:45 PM | #1 |
Member
Join Date: Oct 2012
Location: Auburn, CA
Posts: 64
|
King Pins
City:
Auburn
State:
Ca
I am looking for a supplier that has king pins that are flat on top for Bendix conversions. I need the ones that are made for Model A spindles. I could cut them, but the new ones are a lot better and don't have the hole in the center.
|
11-02-2013, 01:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 1,999
|
Re: King Pins
Would not the V8 ones work ? hope this helps,
|
Sponsored Links (Register now to hide all advertisements) |
|
11-02-2013, 03:52 PM | #3 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,339
|
Re: King Pins
Try Speedway.
|
11-03-2013, 10:11 PM | #4 |
Member
Join Date: Oct 2012
Location: Auburn, CA
Posts: 64
|
Re: King Pins
The V-8 king pins have the notch of the lock bolt in a different place. You must have ones made for a Model A spindle. Of course you can change the spindles, but I would rather not go to that expense.
|
11-04-2013, 08:16 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 493
|
Re: King Pins
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|