The Ford Barn

Dkrahn · 05-27-2022, 08:25 PM

Can somebody point me to a picture that shows how to release the rear brake. I am trying to get the drum back on - it was a beast to remove as well. I think the brake is dragging all the time so I am trying to release it abit.

Appreciate your help

rotorwrench · 05-29-2022, 09:52 AM

Sponsored Links (Register now to hide all advertisements)

With the two separate braking systems in the rear brake, a person if going to have to identify which braking assembly is tight. The main brake set may need to have the adjuster backed off a bit to relieve for close contact that is causing the interference fit you are experiencing. Brake shoe fit to drum can also be an issue. The E-brake is usually not a problem but it depends on the condition and thickness of the linings and condition of the drum. This link has some good photos.
https://www.fordbarn.com/forum/showthread.php?p=1941221

05-27-2022, 08:25 PM	#1
Dkrahn Member Join Date: Mar 2018 Location: Thorndale, Texas Posts: 88	29 pickup rear brake Can somebody point me to a picture that shows how to release the rear brake. I am trying to get the drum back on - it was a beast to remove as well. I think the brake is dragging all the time so I am trying to release it abit. Appreciate your help Last edited by Dkrahn; 05-28-2022 at 11:20 AM.

05-29-2022, 09:52 AM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: 29 pickup rear brake Sponsored Links (Register now to hide all advertisements) With the two separate braking systems in the rear brake, a person if going to have to identify which braking assembly is tight. The main brake set may need to have the adjuster backed off a bit to relieve for close contact that is causing the interference fit you are experiencing. Brake shoe fit to drum can also be an issue. The E-brake is usually not a problem but it depends on the condition and thickness of the linings and condition of the drum. This link has some good photos. https://www.fordbarn.com/forum/showthread.php?p=1941221