The Ford Barn

rust revival · 10-09-2023, 01:49 PM

Double post please remove

California Travieso · 10-09-2023, 02:28 PM

You didn’t mention the model of your car. The only one I’m aware of making reproduction parts is Brookville but they only make them for open cars, e.g., roadsters and roadster pickups. Not sure if that part would fit other cars. You might have to check out the swap meets or online.

David Serrano

Bob C · 10-09-2023, 02:42 PM

Is this what you are looking for? https://www.snydersantiqueauto.com/p...4469&cat=41631

rotorwrench · 10-09-2023, 03:27 PM

Those are on all the 28/29 Phaetons and open cab pickups as well. Brookville manufactures all the sheet metal for model A roadsters and open cab pickups. Phaetons only share the cowl & front doors on four door types.

rust revival · 10-09-2023, 04:09 PM

Sorry 28-29 Roadster ,my cowl post is perfect just missing that inside bracket,and when I click on the Brookville picture it just shows the whole post ,but looking at it it doesn't even show the part I need attached to the post? Are they just using nuts ?

jwmckenzie · 10-09-2023, 04:30 PM

Sponsored Links (Register now to hide all advertisements)

I would call Brookville and see if they would supply just the part you need. May not be in the catalogue, but they have to make them so maybe.......

Bob C · 10-09-2023, 09:02 PM

Vintage Ford list Windshields Post Stancion Backing Plates 1928-29 but
they don't show a picture. https://www.vintageford.com/global_s...54-6&Category=

rust revival · 10-09-2023, 09:12 PM

Thanks everyone. Definitely appreciate your help and time , I'm going to follow up with vintageford and see if I can get a photo

rotorwrench · 10-11-2023, 04:07 PM

The model A parts sources stock a lot of Brookville pieces but finding them in their respective search systems can be a challenge. The paper catalogs were easier to use. Nomenclature for some parts differs and sometimes the parts aren't pared well with associated assemblies for search attempts. It can make for a long search with no good final outcome sometimes.

10-09-2023, 01:49 PM	#1
rust revival Senior Member Join Date: May 2014 Location: Ontario Posts: 207	Double post please remove Double post please remove Last edited by rust revival; 10-12-2023 at 06:34 PM.

10-09-2023, 02:28 PM	#2
California Travieso Senior Member Join Date: Mar 2014 Location: Moreno Valley, CA Posts: 949	Re: 28-29 cowl post stanchions inside bracket You didn’t mention the model of your car. The only one I’m aware of making reproduction parts is Brookville but they only make them for open cars, e.g., roadsters and roadster pickups. Not sure if that part would fit other cars. You might have to check out the swap meets or online. David Serrano

10-09-2023, 03:27 PM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: 28-29 cowl post stanchions inside bracket Those are on all the 28/29 Phaetons and open cab pickups as well. Brookville manufactures all the sheet metal for model A roadsters and open cab pickups. Phaetons only share the cowl & front doors on four door types.

10-09-2023, 04:09 PM	#5
rust revival Senior Member Join Date: May 2014 Location: Ontario Posts: 207	Re: 28-29 cowl post stanchions inside bracket Sorry 28-29 Roadster ,my cowl post is perfect just missing that inside bracket,and when I click on the Brookville picture it just shows the whole post ,but looking at it it doesn't even show the part I need attached to the post? Are they just using nuts ?

10-09-2023, 04:30 PM	#6
jwmckenzie Senior Member Join Date: Feb 2014 Location: Boston, MA Posts: 213	Re: 28-29 cowl post stanchions inside bracket Sponsored Links (Register now to hide all advertisements) I would call Brookville and see if they would supply just the part you need. May not be in the catalogue, but they have to make them so maybe.......

10-09-2023, 09:02 PM	#7
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,755	Re: 28-29 cowl post stanchions inside bracket Vintage Ford list Windshields Post Stancion Backing Plates 1928-29 but they don't show a picture. https://www.vintageford.com/global_s...54-6&Category=

10-09-2023, 09:12 PM	#8
rust revival Senior Member Join Date: May 2014 Location: Ontario Posts: 207	Re: 28-29 cowl post stanchions inside bracket Thanks everyone. Definitely appreciate your help and time , I'm going to follow up with vintageford and see if I can get a photo

10-11-2023, 04:07 PM	#9
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: 28-29 cowl post stanchions inside bracket The model A parts sources stock a lot of Brookville pieces but finding them in their respective search systems can be a challenge. The paper catalogs were easier to use. Nomenclature for some parts differs and sometimes the parts aren't pared well with associated assemblies for search attempts. It can make for a long search with no good final outcome sometimes.