The Ford Barn

backrodebob · 08-23-2021, 06:28 PM

does anybody know of a source for Mallory YL Springs ?

aussie merc · 08-23-2021, 08:01 PM

been chasing them for 5 years MSD dumped all stock when they took over

backrodebob · 08-23-2021, 08:18 PM

Ouch!��

aussie merc · 08-24-2021, 08:55 AM

someone somewhere will have the remains of a set but good luck finding them summit raceing do a set that will fit yl/ym dissys but dont know if they will be right for you otherwise it back to old school ways with welder to add weight and grinder to reduce the weights lots of time required

51 MERC-CT · 08-24-2021, 11:29 AM

Quote:

Originally Posted by aussie merc

someone somewhere will have the remains of a set but good luck finding them summit raceing do a set that will fit yl/ym dissys but dont know if they will be right for you otherwise it back to old school ways with welder to add weight and grinder to reduce the weights lots of time required

Welding and grinding is a way to go but as I recall the weights in the YL are cast pot metal.

aussie merc · 08-25-2021, 09:45 AM

Sponsored Links (Register now to hide all advertisements)

well then its time to get creative and make a set out of steel [use the weights as templets] done it before but it takes time lots of time

BUBBAS IGNITION · 08-25-2021, 11:28 AM

The springs should no need to be replaced they adjust by bending .
If they are damaged then you replace with new spring ( from specter) and readjust on a machine ??

https://www.amazon.com/Mr-Gasket-928...84149834&psc=1

Different sizes

08-23-2021, 06:28 PM	#1
backrodebob Member Join Date: Jul 2019 Location: Union City, CA Posts: 57	Mallory YL springs does anybody know of a source for Mallory YL Springs ?

08-23-2021, 08:01 PM	#2
aussie merc Senior Member Join Date: Sep 2016 Location: sydney australia Posts: 1,033	Re: Mallory YL springs been chasing them for 5 years MSD dumped all stock when they took over

08-23-2021, 08:18 PM	#3
backrodebob Member Join Date: Jul 2019 Location: Union City, CA Posts: 57	Re: Mallory YL springs Ouch!��

08-24-2021, 08:55 AM	#4
aussie merc Senior Member Join Date: Sep 2016 Location: sydney australia Posts: 1,033	Re: Mallory YL springs someone somewhere will have the remains of a set but good luck finding them summit raceing do a set that will fit yl/ym dissys but dont know if they will be right for you otherwise it back to old school ways with welder to add weight and grinder to reduce the weights lots of time required

08-25-2021, 09:45 AM	#6
aussie merc Senior Member Join Date: Sep 2016 Location: sydney australia Posts: 1,033	Re: Mallory YL springs Sponsored Links (Register now to hide all advertisements) well then its time to get creative and make a set out of steel [use the weights as templets] done it before but it takes time lots of time

08-25-2021, 11:28 AM	#7
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Re: Mallory YL springs The springs should no need to be replaced they adjust by bending . If they are damaged then you replace with new spring ( from specter) and readjust on a machine ?? https://www.amazon.com/Mr-Gasket-928...84149834&psc=1 Different sizes __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected]