The Ford Barn

georgewatson396 · 01-09-2013, 01:59 AM

Does anyone know if the NON power steering arms (from the pitman arm to the ball joints) from a 1969 Mustang will fit onto a 1967 Mustang?

thanks, George

craig · 01-11-2013, 12:02 AM

About 35 years ago I put the complete p/s from a 69 big block Mustang into a 67 big block non power steering Mustang. Everything was a bolt in. If I was doing it today I would use the borgeson box instead

georgewatson396 · 01-14-2013, 11:27 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by craig

About 35 years ago I put the complete p/s from a 69 big block Mustang into a 67 big block non power steering Mustang. Everything was a bolt in. If I was doing it today I would use the borgeson box instead

Thank you Craig for confirming what I suspected. I have also checked the Moog part #'s for the 69 steering arms and found they are the same as the part #'s for the 67 steering arms. So thanks again for your help.

01-09-2013, 01:59 AM	#1
georgewatson396 Junior Member Join Date: Jun 2010 Posts: 12	69 to 67 Mustang Steering arms Does anyone know if the NON power steering arms (from the pitman arm to the ball joints) from a 1969 Mustang will fit onto a 1967 Mustang? thanks, George

01-11-2013, 12:02 AM	#2
craig Senior Member Join Date: May 2010 Location: The Inland Empire of Washington State Posts: 368	Re: 69 to 67 Mustang Steering arms About 35 years ago I put the complete p/s from a 69 big block Mustang into a 67 big block non power steering Mustang. Everything was a bolt in. If I was doing it today I would use the borgeson box instead Last edited by craig; 01-11-2013 at 12:03 AM. Reason: additional info