Removing Gas Tank Question

[cowtown]

I am trying to remove my gas tank on my 29 CC Pickup and can't get a wrench on the inside of the two bolts on each side of the tank at the door post. Any idea's on what type of wrench to use?

[KenBolton]

A fire wrench will work. Then you won’t need to worry about which steel wrench to use until you put it back on.

[Dennis Pereira]

Originally Posted by KenBolton

A fire wrench will work. Then you won’t need to worry about which steel wrench to use until you put it back on.

I hope that was a joke a torch and a gas tank is a bad mix .

[700rpm]

Originally Posted by KenBolton

A fire wrench will work. Then you won’t need to worry about which steel wrench to use until you put it back on.

That isn’t funny.

[pbishop]

Use penetrating oil on the whole series of bolts and fasteners and wait. Then use a 'dog bone' wrench. You may have to reverse the position and may even have to heat the wrench and bend it straighter a little if necessary.


As another member stated, flame and gas tanks do not mix well.

[McMimmcs]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 700rpm

That isn’t funny.

X2 for sure!

[cowtown]

Thanks Guys, I managed to get the tank removed. I heated and then bent a old wrench to get it on the nuts inside the door post.