|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-08-2010, 04:51 PM | #1 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
.080 brand new pistons
City:
pulaski
State:
va
Price:
trade
here is a full set of new .080 oversize pistions with the wrist pins.never have been used.when i miked the bores of the motor i am currently working on i thought .080 pistons would work but the cylinders did not clean up whitch left me with the pistons i could not use.i would like too trade them for a complete set of standard pistons(3.875 dia.)of equal quality.usa trads only(lower states).
|
05-09-2010, 07:07 PM | #2 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: .080 brand new pistons
I'll look and see what I have. I know I have a set of very little used std pistons but don't know if I have any brand new ones.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-10-2010, 06:59 AM | #3 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: .080 brand new pistons
thanks jamers let me klnow what you find.
tex |
05-11-2010, 06:54 AM | #4 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: .080 brand new pistons
Tex, I looked and found I have a new set of standard pistons that have a little discoloration on the tops but are none the less new. I can send a pic if you want and we can work out a trade. The pistons have new rings on them if you need them. If not I will use them elsewhere.
|
05-11-2010, 08:02 AM | #5 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: .080 brand new pistons
james
i can also use the rings.are the wrist pins with them?i don't know how too send a privet message on this new site so i can give you my name and address.if you do tell how it is done. tex |
05-11-2010, 11:10 AM | #6 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: .080 brand new pistons
Sponsored Links (Register now to hide all advertisements)
|
05-12-2010, 08:36 AM | #7 |
Senior Member
|
Re: .080 brand new pistons
i have a set of std, very nice ran for less than a hour, or so i was told they do look new let me know hattiesburg ms will pay for shipping both ways cell is 601-408-5256
|
05-12-2010, 01:53 PM | #8 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: .080 brand new pistons
allen
i have already made a trade with someone else.thanks for the reply. tex |
|
|
Sponsored Links (Register now to hide all advertisements) |
|