Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-02-2020, 07:53 PM   #1
Kingo
Member
 
Join Date: Aug 2011
Posts: 76
Default 30 headlight parts finish

I have checked the standards and cannot find the finish for a few of the headlight parts. What was the finish on the rivets, attachment stud and plate on headlight bucket bottom and the stud and spring for the retaining ring?
Kingo is offline   Reply With Quote
Old 12-03-2020, 08:27 AM   #2
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,429
Default Re: 30 headlight parts finish

Rim Latch is polished stainless steel.
Reflector is silver plated.
Rim Retainer Clip is cadmium plated.
Inside Rim Clips are stainless steel.
Rim Latch Retainer Pin, Spring & Rivet are cadmium plated.
Headlight Mounting Bolt & its Retainer Strap are zinc plated.Base Plate to Headlight Shell Rivets are cadmium plated.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-03-2020, 08:51 AM   #3
Kingo
Member
 
Join Date: Aug 2011
Posts: 76
Default Re: 30 headlight parts finish

Thank you
Kingo is offline   Reply With Quote
Old 12-03-2020, 02:43 PM   #4
Kingo
Member
 
Join Date: Aug 2011
Posts: 76
Default Re: 30 headlight parts finish

Sponsored Links (Register now to hide all advertisements)
Base plate cad plated as well?
Kingo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:21 AM.