The Ford Barn

41Fordor · 07-03-2011, 10:06 PM

Hi All

I got the running board covers and am reading all the threads regarding gluing these up. But for mounting back on the body; Macs has 42-48 mounting kits with the small rubber washers (like fender washers) that mount the running board edge to the rocker panels.

But on mine there are also wider mounting pads the go below the running board where it bolts to the frame crossmembers at the A and B pillar bases.. These pads are over 2 inches in diameter and 1/2 inch thick

I found a picture:

Does anyone know of a comparable pad or grommet that could be used?

07-03-2011, 10:06 PM	#1
41Fordor Senior Member Join Date: May 2010 Location: Cheyenne WY Posts: 187	41 Passenger Running Board Mounting Pads Hi All I got the running board covers and am reading all the threads regarding gluing these up. But for mounting back on the body; Macs has 42-48 mounting kits with the small rubber washers (like fender washers) that mount the running board edge to the rocker panels. But on mine there are also wider mounting pads the go below the running board where it bolts to the frame crossmembers at the A and B pillar bases.. These pads are over 2 inches in diameter and 1/2 inch thick I found a picture: Does anyone know of a comparable pad or grommet that could be used? Last edited by 41Fordor; 07-10-2011 at 06:57 AM. Reason: updated with photo