|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-14-2021, 08:08 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Weatherhead fitting source.
I have used an early, (1970's), Weatherhead adapter fitting that works great
when you have a none stock fuel system in an early V8 Ford. Up until recently I was able to get them from the local NAPA store, but they ran out of old inventory, The fitting adapts the Ford 1/4" male compression type fitting to 1/8" pipe thread which provides more hookup options. Anyone know a source for these. The original Weatherhead # is 1513. See photos. Thank you. |
07-14-2021, 10:11 PM | #2 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: Weatherhead fitting source.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-14-2021, 10:13 PM | #3 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: Weatherhead fitting source.
Here's another. Those things must be gold plated:
https://www.applied.com/c-brands/c-e...er/p/105267304 |
07-14-2021, 10:18 PM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,713
|
Re: Weatherhead fitting source.
Try Renner's Corner. I think item B-92288-FLA is what your looking for.
Fourth item down at the link. https://www.rennerscorner.com/carburetor.html |
07-15-2021, 05:00 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: Weatherhead fitting source.
Thank you all for the tips. emailed David at Renner's Corner. This is the application I use this fitting in,
|
07-15-2021, 08:32 AM | #6 |
Senior Member
Join Date: May 2010
Location: Snohomish,WA
Posts: 1,025
|
Re: Weatherhead fitting source.
Sponsored Links (Register now to hide all advertisements)
|
07-16-2021, 05:37 AM | #7 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: Weatherhead fitting source.
Thank you. Will check that out.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|