|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-19-2021, 04:17 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
Crankshaft seal 59ab
LOOKING FOR HELP ON THE FRONT COVER FOR A 59AB ENGINE CRANKSHAFT SEAL. i HAVE ALWAYS USED THE OLD STYLE ROPE SEAL. THERE ARE NEW STYLE SEALS AVAILABLE, i HAVE TWO ONE IS ALUMINUM WITH AN OUTER O RING THE OTHER IS ALL BLACK IN COLOR. i WOULD LIKE TO KNOW WHICH ONE WOULD SHOULD BE USED. ANY ADVICE WOULD BE APPRECIATED. tHANKS sTAN
|
02-19-2021, 05:12 PM | #2 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,303
|
Re: Crankshaft seal 59ab
Use the rope seal. It's the best solution.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-19-2021, 05:40 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Crankshaft seal 59ab
I use the one piece seal exclusively. Either one will work just fine. I don't have a preference.
|
02-19-2021, 05:45 PM | #4 |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,524
|
Re: Crankshaft seal 59ab
Stan I like the aluminum one with the outer O ring I found it centers nicely between the pan and front cover especially considering each are somewhat different in shape. Found no leaks at 200 MPH.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH |
02-26-2021, 04:34 PM | #5 |
Junior Member
|
Re: Crankshaft seal 59ab
Hi guys, new here & wondered if somebody could tell me the years that they had the pin to prevent you from replacing the rope seal from the bottom--
the easy way. Thanxs, Pete |
02-26-2021, 04:37 PM | #6 |
Junior Member
|
Re: Crankshaft seal 59ab
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|