|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-08-2023, 12:51 AM | #1 |
Senior Member
Join Date: May 2010
Location: Lower Mainland B.C. Canada
Posts: 136
|
39' Toploader Oil Baffles?
Simple question,
Do the two oil baffles on the input and main shafts float or are they fixed once the universal joint is snug? I have a gennie universal joint that I rebuilt with the Van Pelt kit and a stock "cupped" washer in place (not the Van Pelt washer) everything still spins nice and free once the universal is snug however the oil baffles are compressed and spinning with the shafts. Is this correct? Thank You Last edited by Jason M.; 01-08-2023 at 04:02 PM. |
01-08-2023, 01:12 AM | #2 |
Member
Join Date: Jan 2018
Location: Kaikoura New Zealand
Posts: 58
|
Re: 39' Toploader Oil Baffles?
Yes the baffles should be fixed to the shafts & turn with them.
Phil |
Sponsored Links (Register now to hide all advertisements) |
|
01-08-2023, 04:39 PM | #3 |
Senior Member
Join Date: May 2010
Location: Lower Mainland B.C. Canada
Posts: 136
|
Re: 39' Toploader Oil Baffles?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|