39 Ford Frame Differences

[Shampipple]

I'm tearing down my 39 Pickup for cleanup, new brake components and freshen up.

I have no clue if this is the original frame. My question is, at the moment I cannot see the master cylinder from the top. I thought these were mounted under the floor boards.

I'm curious if someone has swapped a car frame for the pickup frame?

Do any of you know where the M/C should be located on the 39 Pickup versus the 39 Car? I'm not worried about it as I could always cut an access hole, but it seems odd.

[GaryU.]

Should be same spot, under the driver's feet. '39 pickup has a wood floor board with an access hole to refill the M.C. Maybe a few pictures would help.

[deuce lover]

Should be connected to the pedal assy also.

[Shampipple]

Of course, I'm at work and the truck is in storage. I'll be on it later today. I have not figured out how to post pics on here other than my display. Yes, it's connected to the pedal. Yes, there is a wood floor, but the M/C seems to be under my seat platform. I'll definitely dig into it. The body is coming off, new M/C, wheel cylinders, lines, etc. I was just trying to find out if there were location differences in car and truck frames. I have reason to believe the frame was swapped.

[swoopNZ]

The rear diagonal chassis sections on a pickup have several round cutout sections on each side like the convertible.The sedans/coupes have only about 3 each side from memory. Kube will know for sure.

[corvette8n]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Shampipple

Of course, I'm at work and the truck is in storage. I'll be on it later today. I have not figured out how to post pics on here other than my display. Yes, it's connected to the pedal. Yes, there is a wood floor, but the M/C seems to be under my seat platform. I'll definitely dig into it. The body is coming off, new M/C, wheel cylinders, lines, etc. I was just trying to find out if there were location differences in car and truck frames. I have reason to believe the frame was swapped.

Try cropping your pictures and emailing them to yourself, this usually reduces the size enough to post them.

[38bill]

The 1/2 T's were actually called "commercial cars". Most but not all of the mechanics are the same as the cars. A car frame would have body mounts on the outside of the frame rails but those can be removed and the frame can be used for a 1/2 T.

[billbrown]

same frames.