|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-22-2015, 08:19 PM | #21 |
BANNED
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
|
Re: New Shop is coming along.
haha he is retired he will be out there a lot, especially with a shop that nice.....
and you'd be surprised how quickly a modern scroll AC compressor can pull down a space....
__________________
'31 180A |
12-22-2015, 08:34 PM | #22 |
Member
Join Date: Feb 2015
Location: New Philadelphia, Ohio
Posts: 32
|
Re: New Shop is coming along.
Hi Wick, congratulations on your recent retirement and new garage project! I built my 40x56 hobby garage with lift 5 years ago, and would like to offer a few suggestions regarding the lift purchase: First take the time to do plenty of research on lift types and manufacturers. You will find that with very few exceptions, lifts are manufactured offshore now. Don''t let this discourage you, the most important consideration is to buy a lift that is ALI certified. For primarily auto lifting duty versus pickup trucks, I would suggest an asymmetrical lift as it makes entry/exit from the car much easier. If you have the width in your bay, choose the wide configuration lift as this also makes entry/exit much easier. Finally on the installation, unless you are very well equipped to assemble and install the lift, I would suggest professional installation and setup/adjustment. This is in my opinion well worth the cost to help insure a safe reliable installation.
My lift is a Bend Pak 10,000 lb capacity asymmetrical and it has been flawless, lifting everything from my 1930 town sedan to my C6 Corvette. Good luck with your new shop! I know you'll enjoy it. Mark |
Sponsored Links (Register now to hide all advertisements) |
|
12-23-2015, 01:33 AM | #23 |
Senior Member
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,495
|
Re: New Shop is coming along.
My vote is for a Mohawk. I have been in several shops and used most of the brands
American and Chinese. I own a Mohawk and would say it's the best of the lot I have had it for 15yrs. and never had a problem. |
12-23-2015, 06:23 AM | #24 |
Member
Join Date: Feb 2015
Location: New Philadelphia, Ohio
Posts: 32
|
Re: New Shop is coming along.
Without a doubt Mohawk is the best if price is of no consideration, but he certainly doesn't need a Mohawk for hobby car work. Most dealerships and independents don't even put that kind of investment into lifts.
|
12-23-2015, 07:12 AM | #25 | |
Member
Join Date: Jul 2012
Location: Galesburg, KS
Posts: 87
|
Re: New Shop is coming along.
Quote:
I'd second that. Our lift has them over head and a joy to use.
__________________
1929 A Special Coupe 1926 T Speedster |
|
12-23-2015, 07:19 AM | #26 |
Member
Join Date: May 2013
Location: Ontario, Canada
Posts: 81
|
Re: New Shop is coming along.
Sponsored Links (Register now to hide all advertisements)
|
12-23-2015, 09:02 AM | #27 |
Senior Member
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,386
|
Re: New Shop is coming along.
There is a 7' door on the side leading into a enclosed 18x22 shed. This will get a floor in the future. Will be a parts room/a place to powder coat and paint. The floor will be painted tan,walls white. 4 fans in the ceiling. Each car will have it's own stall with overhead storage for parts for that car. I can install my own lift,at Dupont I was a millwright and did alot of Laser alignment installing pumps,motors,equipment etc.
I will buy a certified lift,the Mohawk would be over kill but I will have a Dodge 2500 diesel on the lift a time or two. My home is a 3 car garage with a apartment above. The Bicycle collection will go in that garage. I will run out of room here. Retired for almost 4 months and have not had a day off yet! |
12-23-2015, 10:39 AM | #28 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: New Shop is coming along.
Running out of room was my first thought also. It seems to go right along with restoring a car. You take your best estimate for the time and cost involved, then double it. You always need to double your storage estimates also.
|
12-23-2015, 10:49 AM | #29 |
Senior Member
Join Date: Nov 2013
Location: Portugal
Posts: 374
|
Re: New Shop is coming along.
|
12-23-2015, 11:19 AM | #30 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: New Shop is coming along.
The larger the shop the more space gets tied up with junk... A smaller shop seems to stay more tidy.... Does that make sense? not sure
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|