|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-15-2011, 01:17 PM | #1 |
Junior Member
Join Date: May 2010
Location: Hampton, Virginia
Posts: 15
|
Transmission gears
Need to replace some of the gears in a transmission am rebuilding. Have been unable to find very good ford gears. I see one parts vendor's gears are made in Denmark, and other vendors advertise their gears as USA made. Has anyone had experience with the Danish manufactured gears? Are they equal to the USA manufactured gears?
|
09-15-2011, 01:51 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,906
|
Re: Transmission gears
I asked this same question about three months ago. Brent posted some comparative photos. The quality difference was obvious. I went with the USA gears. They are perfect! For all the trouble involved with R&R on the trans, the extra expense is worth it. If you do a search here you will probably find that original post from Brent.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-15-2011, 08:12 PM | #3 |
Junior Member
Join Date: May 2010
Location: Hampton, Virginia
Posts: 15
|
Re: Transmission gears
Thank you. Just the information I needed.
|
09-16-2011, 08:56 AM | #4 |
Senior Member
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,389
|
Re: Transmission gears
Mike,let me know what gears you need. I have some extra N.O.S and some lightly used gears.
Wick Mathews Va. |
09-16-2011, 09:24 AM | #5 |
Junior Member
Join Date: May 2010
Location: Hampton, Virginia
Posts: 15
|
Re: Transmission gears
Hi Wick, looking for complete gear set. What nos gears do you have?
Kelley, Hampton, VA |
09-16-2011, 10:06 AM | #6 |
Senior Member
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,389
|
Re: Transmission gears
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|