|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-13-2018, 02:24 PM | #21 | |
Senior Member
Join Date: Aug 2011
Location: Battle Ground WA
Posts: 293
|
Re: Coil Voltage ???
Quote:
On this same subject, and in response to a post saying any coil will not be any harder on the point than any other coil, not so. It all depends on the resistance and inductance of the primary side of the coil matching the condenser. If you use a coil with very low resistance, say 1.0 ohms, it will draw a lot more current than a coil with say 2.0 ohms, and the points will probably not be happy. It's simple electronics, not mystic voodoo.
__________________
Corley ----------------- Subscribed to the KISS principle! |
|
08-13-2018, 02:42 PM | #22 |
Senior Member
Join Date: Apr 2013
Location: Oregon
Posts: 465
|
Re: Coil Voltage ???
HAHAHAHA. Well see, if he had been wearing his "Depends", that wouldn't have happened! Let that be a lesson!
|
Sponsored Links (Register now to hide all advertisements) |
|
08-13-2018, 03:10 PM | #23 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Coil Voltage ???
I don't need a cite from anyone . I make my own determination . You and some others act like you have never heard of a performance coil . Performance coils do work or they wouldn't have been available for all of these years. The Mallory bee hive coil was probably available in the times that model A's were in regular use or built . I have used the 30.000 volt Bee hive coils and they give a good boost as well . You mention compression ratio and cam specs , Those mods are certainly not the only things that can add power and effect performance . You mention when the charge is lit . The coil is the major part that lights the charge. Your ignorance and rudeness is pathetic . It is obvious that all that you and your buddy from the other side are trying to do is stir up trouble and disagreement . It seems that all that it takes is the mention of the coil that I use to set off your bull $hit. Personally I could care less what type coil that a person chooses to use . You keep mentioning original parts . Original coils are no longer easily found . Most are using aftermarket coils that are available from vendors . Most replacement coils fail to jump a 10.000 volt gap with my coil tester . Nobody has suggested that you should use a flame thrower coil, you would probably hook it up wrong anyway .
|
08-13-2018, 03:24 PM | #24 | |
Senior Member
Join Date: Aug 2011
Location: Battle Ground WA
Posts: 293
|
Re: Coil Voltage ???
Quote:
__________________
Corley ----------------- Subscribed to the KISS principle! |
|
08-13-2018, 03:55 PM | #25 | |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Coil Voltage ???
Quote:
Saying that you are sorry is just another lie. Its very obvious what you are trying to do . What makes you think that you know what compression ratio that I am running . I'm running several performance modifications and as I have said many times , they all work together. You are just grasping at straws for reasons that don't apply in my case . I said that the flame thrower coil has done no harm to my original style points in 12 years when I installed my 40.000 volt coil. Your type of crap isn't helping anybody !!! |
|
08-13-2018, 04:16 PM | #26 | |
Senior Member
|
Re: Coil Voltage ???
Sponsored Links (Register now to hide all advertisements)
Quote:
I beg to differ. Based on the attitude you displayed in this thread an others it’s YOU who is the “know it it all.” David Serrano |
|
08-13-2018, 04:18 PM | #27 | |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Coil Voltage ???
Quote:
There really is no need in responding to your type of crap . I've owned and worked on model A's since 1960. I built my collection of model A's out of rough cars that most would shy away from . I have worked on and rebuilt every part of the model A by myself . The only help that I ever needed was for some of the machine work that I didn't have the equipment to perform . I didn't say that I know it all . I sure as hell know way more than you and your trouble making buddies from the other side and I make NO apology for it !!!!!!! Last edited by Purdy Swoft; 08-13-2018 at 04:46 PM. |
|
08-13-2018, 04:41 PM | #28 | |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Coil Voltage ???
Quote:
Thanks David , its good to see that I'm not alone in this thought . Thanks again . When I gets to the point that corley and his buddies are all that post here , Well , I think that you know what I mean . A lot of the people with a lifetime experience with the model A have already left . I have posted on this site for nearly 18 years . If a person goes to the profile of any of these people and read all of their posts it is evident that very little or any of their posts gave any usefull model A info . Last edited by Purdy Swoft; 08-13-2018 at 06:47 PM. |
|
08-13-2018, 06:52 PM | #29 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Coil Voltage ???
Thanks Mike for pointing out this fact .
|
08-13-2018, 09:41 PM | #30 |
Senior Member
Join Date: Aug 2011
Location: Battle Ground WA
Posts: 293
|
Re: Coil Voltage ???
Well, since I owned and rebuilt my first model A in 1955, and have been wrenching on them ever since, I got you there. Also, ignition coils are not unique to model As, in fact nothing about ignition systems on model As is truly unique. And, yes, as an electrical engineer by training in college, I must admitt that I probably do know more about ignition systems than the average guy. Also, having built and worked on several high performance race engines, I have a pretty good knowledge of when an ignition system might be insufficient, and can use a bit more juice. I stand by my statement, the stock ignition system, in good condition, provides all the voltage that low compression engine can use. Any more than about 20k volts on an A buys you a big fat zero in performance.
More importantly, why is it that whenever you are called out as being inaccurate, you feel the need to belittle the person pointing out your error? Come on man, be an adult! Accept that once in a while, you may not be the expert. And please, Don't personally attack people (not just me, others as well,) when you don't know squat about them or their qualifications. It's not cool!
__________________
Corley ----------------- Subscribed to the KISS principle! |
08-13-2018, 10:28 PM | #31 |
Senior Member
|
Re: Coil Voltage ???
Really? We are getting riled up over the voltage of a coil? Isn't the weather nice where you guys are? This kind of talk is usually found in the dead of winter and caused by cabin fever, not in August.
Look, for all those that are reading this, use what ever makes you feel good and gets you out on the road. Twenty thousand, 40 thousand, 100 thousand does it really make a difference in the vast, vast majority of the low compression/low HP of the A engines out there? The single case that I can see for a 40k coil that would make a real difference is if you have blowby and your plugs get oily. I would thing (and it is my opinion and not based on any scientific study) that a hotter spark would cut through the oil better. Fords first engine the "kitchen sink" engine ran on household voltage.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
Sponsored Links (Register now to hide all advertisements) |
|