|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-16-2010, 05:05 PM | #1 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 941
|
Message for Jim Brand-carb problem
Sponsored Links (Register now to hide all advertisements)
The probelm I have is indeed with a carburetor rebuilt by another. I put the carb. on my truck, but it would only sputter and try to fire, but would not start. I have not disassmebled the unit yet, as I was trying to learn what the problem might be. The fuel bowl is full of gas, as I took just the bottom loose. Fuel is flowing into the carb but it is not firing. My suspicion is the comp. jet is blocked, or the opening at the botrtom of the GAV is blocked. I was hoping the guys with the knowledge on Ford Barn would offer a pointed answer. Thanks for the great pin stripe job!! Took second place at the AACA show at the Henry Ford Musuem in Sept. Bob
__________________
Bob from Northport Northport, Michigan |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|