|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-02-2016, 07:59 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: Nor*Cal
Posts: 720
|
Same piece of glass rear of a 35 3 window for roll down and fixed?
I wanted to order glass for my car and i have a roll down rear window, was wondering if thats the same piece of glass a fixed rear window?
Thanks Kevin
__________________
Throttle Benders Est. 1949
|
08-02-2016, 08:44 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,826
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Pretty sure all coupes have roll-down rear windows, so I don't think there would be a choice.
Sedan rear windows have a totally different shape as evidenced by the difference in garnish moldings. |
Sponsored Links (Register now to hide all advertisements) |
|
08-04-2016, 03:10 PM | #3 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
If you have a roll down rear window, it is not the same as the fixed window. Not all Coupes had roll down rear windows, at least for 5W type.
|
08-04-2016, 06:54 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,826
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Quote:
is a third type of garnish, coupe sized; but without slots for the rubber bumpers? |
|
08-05-2016, 01:23 PM | #5 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Fixed window frames have the same slots, but no rubber installed. Those slots help identify the difference between the Coupe rear window frame and the Sedan rear window frame that does not have the slots.
|
08-05-2016, 01:55 PM | #6 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Sponsored Links (Register now to hide all advertisements)
Ford lists just one part # for the glass...48-724210-B |
08-05-2016, 03:40 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: Atlanta GA
Posts: 505
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Where can I get some rubber bumpers for my roll down rear window?
|
08-05-2016, 05:09 PM | #8 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Bob Drake lists the door window bumpers B-7021444 set of 5 for one window. I believe these are 35 Ford only, since 36 Ford has whisker molding around the window frame. I believe they work for the roll down rear window.
The part number may be only one, but the glass for fixed window is curved the shape of the frame, while the roll down window is square along the bottom for the track for the roll down system. |
08-06-2016, 10:57 AM | #9 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: Same piece of glass rear of a 35 3 window for roll down and fixed?
Gary, Do you have a picture of the fixed rear window glass with the curve? My recent research at The Benson Ford Archives has turned up only the square bottomed glass. I also checked with the fixed rear glass for a sedan and it too had a square bottom edge. Any help on this issue would be appreciated.
Regards, Don Rogers |
|
|
Sponsored Links (Register now to hide all advertisements) |
|